Symphonic DSC313B owner manual Clock SET UP, Auto / Manual, Auto Clock Setting

CLOCK SET UP	1 Select “SETTING CLOCK”
(AUTO / MANUAL)	Press the MENU button on the		– M E N U –
			TIMER PROGRAMMING
			PICTURE CONTROL
	remote control.		B SETTING CLOCK
			CHANNEL SET UP
Set the clock accurately for proper automatic timer	Press the PLAY/K or STOP/L but-		USER’S SET UP
			V-CHIP SET UP
			LANGUAGE [ENGLISH]
recording. If the Public Broadcasting Station (PBS)	ton to point to “SETTING		CAPTION [OFF]
			ZERO RETURN
			TIME SEARCH
is available in your area, follow “AUTO CLOCK	CLOCK”.
SETTING”. If it is not, follow “MANUAL CLOCK	Then, press the F.FWD/B button.
SETTING”.
AUTO CLOCK SETTING	2 Set “AUTO CLOCK” to [ON]		– SETTING CLOCK –
	Press the F.FWD/B or REW/s		B AUTO CLOCK	[ON]
You can have the TV/VCR set the clock automatical-
	button repeatedly until [ON]		AUTO CLOCK CH	[AUTO]
ly by using the Public Broadcasting Station (PBS)	appears.		MANUAL CLOCK SET
channel in your area. Once you have set the clock by			D.S.T.	[OFF]
using the following procedure, the TV/VCR will
automatically monitor the correct time and date	3 Enter the channel number for the PBS station
being broadcast by the PBS station in your area,
using a new service called Extended Data Service	Press the PLAY/K or STOP/L but-		– SETTING CLOCK –
(XDS).	ton to point to “AUTO CLOCK		AUTO CLOCK	[ON]
	CH”.		B AUTO CLOCK CH	[AUTO]
Make sure ...	Then press the F.FWD/B or		MANUAL CLOCK SET
	REW/s button until the channel		D.S.T.	[OFF]
• TV/VCR power must be turned on.
	number for your local PBS station appears.
• Confirm that the antenna connections are correct.	If you do not know the PBS channel number, leave it
• The cable converter box must be turned on if your	set to [AUTO] which is located before [2]. The
TV/VCR is connected directly to it. (See NOTES:)	TV/VCR will search automatically all available
• The channel is properly set in advance.	channels for the local PBS station, and will select
	that channel.
NOTES:
• Auto clock setting only needs to be set once. But it	4 Exit the Auto Clock Setting
can be done again if the clock’s time has become	Press the MENU button on the remote control to
incorrect for some reason.
	return to TV mode.
• If the TV/VCR is connected directly to a cable
converter box or satellite box, the local PBS sta-	5 Turn off the TV/VCR
tion must be selected on the cable box itself, and
the TV/VCR must be set to the output channel of	Turn the TV/VCR off. Because the Auto Clock func-
the cable converter box or satellite box (usually	tions automatically while the TV/VCR is off.
channel 3 or 4), to be able to set up or correct the	If you choose [AUTO],
clock automatically.
	• The TV/VCR must search until the PBS channel is
If you do not know what your local PBS station is,
	found. It must scan each channel for a couple of
then follow “Manual Clock Settings”.
	seconds to determine if that channel is transmitting
The TV/VCR cannot control the channels of the
	the XDS signal.
cable converter box or satellite box.	• If the time, that is automatically set by this selected
• If you use a mobile connection, you cannot set the
	PBS station is incorrect, it may not be your local
Auto Clock and D.S.T. functions.	PBS station, but one from a different time zone. Or
	there is a case that no channel is broadcasting the
	XDS signal in your area, as shown by no time. In
	these cases, you must manually enter the correct
	local PBS station, or set the clock manually and
	turn off the Auto Clock Setting feature.
	MANUAL CLOCK SETTING
	Make sure ...
	• TV/VCR power must be turned on.
	In the example below, the clock is to be set to:
	DATE	May 1st, 2001
	SETTING TIME	5:40PM
- 12 -				EN

0B19