SERVICE REMOCON
2. HOW TO CHECK TV SECTION WITHOUT VCR DECK
If you want to check TV section without DECK mechanism, then please perform in this order.
1.Pull out the power cord.
2.Remove the VCR DECK mechanism.
3.Supply the main power. ( Main sw on )
4.Wait for about 10 seconds. ( You can see the light of power LED if the TV is normal.
5.Turn on the TV using the remocon. ( You can see the OSD "EMERGENCY" )
6.Check the TV section.
3.Refer to general adjustment
1.S-CORR +/- ( S-CORRECTION )
Press this button to adjust the same distance between horizontal lines on screen of crosshatch pattern.
2. V-SLOPE +/- ( VERTICAL SLOPE )
Press this button to adjust the border line of blanked picture coincident with the center marks of the pattern.
3. V-CENT +/- ( VERTICAL CENTER )
Press this button to adjust the center line of the pattern coincident with the mechanical center marks of the CRT on screen of RETMA pattern.
4. V-SIZE +/- ( VERTICAL SIZE )
Press this button to adjust the upperside of the pattern coincident with the mechanical center marks the CRT on screen of RETMA pattern.
5.H-CENT +/- ( HORIZONTAL CENTER )
Press this button to adjust picture centering with
6.R,G,B +/- ( WHITE BALANCE )
The screen is become WHITE adjust R,G,B level by this button.
7.ATK OFF ( Auto tracking off )
Press this button to adjust
Front panel's LED's are lighted up if you press this button.
Press the PB button.
ATK OFF: | (RED, RED) |
ATK MAX : | (BLINK, OFF) |
ATK MIN : | (OFF, BLINK) |
ATK ON : | (BLINK,BLINK) ; LEFT LED = |
8. REC
Press this button to adjust AUTO PG. 9. SCREEN
Press this button to adjust the screen volume on FBT.
10. SHIP ( SHIPPING CONDITIONS )
Press this button to set the SHIPPING CONDITIONS. 11. SUB AGC ( Only
Press this button to adjust SUB TUNER AGC. Press once : picture is displayed colour pattern.
Press once more : picture is displayed black/white pattern. 12. AGC +/-
Press this button to adjust MAIN TUNER AGC.
9