Emerson EWC19T4 owner manual To Cancel the DAYLIGHT-SAVING Time

NOTE: During Auto Clock CH Search, the picture may be distorted, this is normal.

4Enter the channel number that contains the Automatic Clock Setting Signal

Press the SETUP button on the remote control.

DAYLIGHT-SAVING TIME

TV/VCR

Select this feature and the unit’s clock automatically will advance one hour in April, then reverse one hour in October.

Press the Arrow button K or L to select “SETTING CLOCK”. Press the ENTER button to enter “SETTING CLOCK” menu. Press the Arrow button L to select “AUTO CLOCK CH”.

Press the ENTER button or the Arrow button { or B until you locate Auto Clock Set station num- ber. See step [3] on page 16.

- TV/VCR SETUP -

TIMER PROGRAMMING

BSETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH INDEX SEARCH

– SETTING CLOCK –

AUTO CLOCK	[ON]
AUTO CLOCK CH SEARCH
B AUTO CLOCK CH	[ 45]
MANUAL CLOCK SET
D.S.T.	[OFF]

When Daylight-Saving Time is ON, the clock will change automatically as follows:

•First Sunday of April : At 2 AM the clock imme- diately changes to 3 AM. Any timer programming you have set to occur between 2 AM and 3 AM will not record.

•Last Sunday of October : At 2 AM the clock immediately changes to 1 AM.

Make sure ...

•Press the POWER button to turn on the unit.

Press the SETUP button to exit the screen.

1 Select “SETTING CLOCK”

Press the SETUP button on the

- TV/VCR SETUP -

5Turn off the unit

Once the unit is turned off, it will periodically check and set the correct date and time.

remote control.

Press the Arrow button K or L to

point to “SETTING CLOCK”.

Then press the ENTER button.

TIMER PROGRAMMING

BSETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH INDEX SEARCH

2Set “D.S.T.” (Daylight-Saving Time) to [ON]

Press the Arrow button K or L to	– SETTING CLOCK –
point to “D.S.T.”.	AUTO CLOCK	[ON]
Then press the ENTER button until	AUTO CLOCK CH SEARCH
	MANUAL CLOCK SET	[ 02 ]
	AUTO CLOCK CH
[ON] appears.	B D.S.T.	[ON]

3Exit the Daylight-Saving Time mode

Press the SETUP button on the remote control to return to TV mode.

TO CANCEL THE DAYLIGHT-SAVING TIME

Repeat steps [1] to [2] and select [OFF] using the ENTER button.

- 17 - EN

1C29