Daewoo DVQ 9H1FC instruction manual Overview of Your Equipment, Your TV/VCRs Front Panel

C H A P T E R

1

Overview of Your Equipment

Your TV/VCR’s comes with a remote control. The section below summarizes the buttons, controls, and terminals that will use with your TV/VCR’s.

Your TV/VCR's Front Panel

Below you will find short description of the buttons and indicators on the front panel. These are use following functions.

1VIDEO in jack

Use this jack to receive a video signal from another A/V component.

2AUDIO in jack

Use this jack to receive a audio signal from another A/V component.

3EAR PHONE jack

Use this jack to the earphone (not supplied). The sound from the speaker is turned off.

4yCHx buttons (channel)

Press these buttons to change channels on your TV/VCR. You will also use these buttons to adjust the tracking.

5 CVOLB buttons (volume)

Press these buttons to change your TV/VCR’s volume.

6Remote control receiver

This receiver receives a signal from your remote control. Do not block it.

7STAND-BY(red) indicator

This indicator light up when the power is off.

8REC/T.REC (red/green) indicator

This indicator light up red when recording and light up green when timer program operat- ing.

9REC button

Press this button to begin recording. Press repeatedly to set a recoding time using One-Touch Recording (OTR).

10REW button

Press this button to rewind the tape.

4Chapter 1 : Overview of Your Equipment