Normal Playback, Auto Repeat Playback | Sylvania SRC2213 specification

INSERTING A CASSETTE

Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the TV/VCR. The TV/VCR will automatically turn on.

Window

NEW CODE

X X X X

CONFIRM CODE

_ _ _ _

CHANGE ACCESS CODE

To change access code, follow the steps.

Press the MENU button so that the TV/VCR SETUP display appears on the TV screen.

2		– M E N U –
	TIMER PROGRAMMING
	PICTURE CONTROL
	SETTING CLOCK
Press the PLAY/K or STOP/L but-	CHANNEL SET UP
	USER’S SET UP
ton to point to "V-CHIP SET UP".	B V-CHIP SET UP
	CAPTION [OFF]
	LANGUAGE [ENGLISH]
Then, press the F.FWD/B button.	ZERO RETURN
	INDEX SEARCH
	TIME SEARCH

3	ACCESS CODE
Use the number buttons to enter 4-
digit access code. The default code		_ _ _ _

is 0000.

4	– V-CHIP SET UP –

Press the PLAY/K or STOP/L but-	TV RATING
	MPAA RATING
	B CHANGE CODE
ton to point to "CHANGE CODE".
Then, press the F.FWD/B button.

Use the number buttons to enter your desired access code in the NEW CODE space. Then enter the same code in the CONFIRM CODE space. V-CHIP SET UP screen appear on the screen.

•If you enter wrong code, repeat step 5, making sure you enter the same new code exactly in the confirm code space.

Press the MENU button to exit the TV/VCR SETUP.

Note:

•If you unplug the power code or power failure occurs, the changed access code will be lost and will return to default (0000). Change your access code again as necessary.

PLAYBACK

This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes.

PRECAUTIONS

• Avoid moisture. Moisture condensation may occur on the tape if it is moved from a cold place to a warm place or visa versa. Before using a tape with these conditions, to avoid damage of the tape and your TV/VCR, wait until the tape has warmed to room temperature and the moisture has evaporated.

• Avoid extreme heat, high humidity and magnetic fields.

• Do not tamper with the cassette mechanism.
• Do not touch the tape with your fingers.	CORRECT	WRONG

NORMAL PLAYBACK

Make sure ...

•TV/VCR power must be turned on.

1Insert a prerecorded tape

If the erase-protection tab has been removed, the TV/VCR will start playback automatically.

2To begin playback

PLAY B

Press the PLAY button.

Note: If any menu is activated on the screen, the PLAY button does not function. Press the MENU but- ton to clear the menu. then, press the PLAY button.

3 To stop playback	STOP

Press the STOP button when play- back is completed.

AUTO REPEAT PLAYBACK

The TV/VCR has the auto repeat function that allows you to repeat a tape indefinitely without touching the PLAY button.

ALL REPEAT: Repeat playback from the beginning to the end of the tape.

BLANK REPEAT: Repeat playback from the begin- ning to a blank part, which is blank for more than 10 seconds.

1 Select “USER’S SET UP”	– M E N U –
Press the MENU button on the	PICTURE CONTROL
	TIMER PROGRAMMING
remote control.	SETTING CLOCK
remote control.	CHANNEL SET UP
Press the PLAY/K or STOP/L but-	B USER’S SET UP
	V-CHIP SET UP
	LANGUAGE [ENGLISH]
ton to point to “USER’S SET UP”.	CAPTION [OFF]
ton to point to “USER’S SET UP”.	TIME SEARCH
	ZERO RETURN
Then, press the F.FWD/B button.
- 17 -	EN

Sylvania SRC2213 Normal Playback, Auto Repeat Playback, Change Access Code, Precautions