Sylvania SRC2213 To Cancel the Repeat Play Mode, Picture Search, Time Search, Zero Return

2	Select “ALL” or “BLANK”	– USER’S SET UP –
Press the PLAY/K or STOP/L but- RENTAL			[OFF]
ton to point to “REPEAT PLAY”.		B REPEAT PLAY	[ALL]
		AUTO RETURN	[OFF]

Press the F.FWD/B or REW/s button repeatedly until your

desired selection [ALL] or [BLANK] appears.

3Exit the Repeat Play setting

Press the MENU button on the remote control to return to the TV mode.

4Start playback

Press the PLAY button to start the Repeat Play. ”REPEAT PLAY B” appears.

•Once you select the Repeat Play mode, it stays in effect even after you turn off the TV/VCR.

•If the Rental mode is set [ON], the “RENTAL PLAY B” display has priority.

TO CANCEL THE REPEAT PLAY MODE

Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button on the remote control. Press the MENU button on the remote control to return to TV mode.

If there is a power failure of any kind, the unit will retain its memory for this feature.

SEARCH

PICTURE SEARCH

This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted.

1)You may view a video tape at a high speed in either a forward or reverse direction by pressing the F.FWD or REW button. (in the SP / LP / SLP modes)

2)Press it again and the TV/VCR will now search in super high speed. (in the LP / SLP modes only)

1Stop a tape at your desired point

Rewind or fast forward the tape to the beginning point at which you want to review.

2Reset the counter to 0:00:00

Press the COUNTER RESET button repeatedly.

3Begin recording or playback

Press the RECORD or PLAY button.

Press the STOP button when recording or playback is completed.

4To activate “ZERO RETURN” mode

Press the MENU button on the remote control. Press the PLAY/K or STOP/L button to point to “ZERO RETURN”.

Then, press the F.FWD/B button.
The counter will appear on the TV		– M E N U –
screen.		PICTURE CONTROL
		TIMER PROGRAMMING
The tape will automatically stop		SETTING CLOCK
		USER’S SET UP
		CHANNEL SET UP
when the counter returns to		V-CHIP SET UP
		LANGUAGE [ENGLISH]
0:00:00.		CAPTION [OFF]
		TIME SEARCH
	B	ZERO RETURN

TIME SEARCH

The Time Search function makes it possible to quick- ly advance the tape to your desired position simply by entering the exact amount of playback time you want to skip.

NOTES:

•Time Search can be set up to a maximum of 9 hours 50 minutes (9:50) by 10 minutes at a time.

•This function will not operate in recording mode. In the example below: To watch a program after 2 hour 50 minutes from the present position, in either direction.

NOTE: Tapes recorded in the SP or LP mode will		1 Insert a tape.
display a noise bar on the TV screen and the pic-
ture may revert to Black and White. This is normal.
		2 Select “TIME SEARCH” mode
3)Press the PLAY button to return to normal speed.
	Press the TIME SEARCH button (with each push it
ZERO RETURN	will increase by 10 minutes).
This function allows you to search easily a beginning
		3 Enter your desired time
point that you want to review by rewinding or fast
	Press the PLAY/K or STOP/L but-
forwarding.			TIME SEARCH
	ton until your desired time appears.
NOTE:			2 : 50
	(Example: “2:50” stands for 2 hours
Zero Return WILL NOT work on a blank tape or a
	50 minutes)
blank portion of a tape.
	If you wish to cancel the Time
	Search at this point, press the
	MENU button on the remote control.
- 18 -			EN

1K09