Sylvania SRC2109D owner manual Hints for Automatic Timer Recording, Wake UP Timer, Auto Return

TO CANCEL AN AUTOMATIC TIMER RECORDING

•After setting a program; 1)Press the POWER button.

2)Repeat steps [1] ~ [2]under TIMER RECORD- ING, page 20, and select a program you want to cancel.

3)Press the T-PROG. CLEAR button.

4)Press the MENU button on the remote control to return to TV mode.

•While recording is in progress; 1)Press POWER button.

2)Press the STOP/EJECT button on the TV/VCR.

TO CHECK THE BEGIN/END TIME

1)Press the POWER button so that the REC indicator goes off.

2)Press the MENU button on the remote control. 3)Confirm “TIMER PROGRAMMING” is pointed

to.

2 Set “AUTO RETURN” to [ON]	– USER’S SET UP –
Press the PLAY/K or STOP/L but-	RENTAL	[OFF]
ton to point to “AUTO RETURN”.	REPEAT PLAY	[OFF]
	B AUTO RETURN	[ON]

Press the F.FWD/B or REW/s button until [ON] appears. Then,

press the MENU button on the remote control to return to TV mode.

3Auto Return will begin

When all the timer recordings are completed, the TV/VCR will rewind to the beginning of the recorded program(s).

NOTE:

•If you press the POWER button while tape is rewinding, the Auto Return will stop.

4Watch the recorded program

Press the PLAY button.

4)Press the F.FWD/B button. The details of pro- grams appear on the TV screen.

5)Press the MENU button on the remote control to return to TV mode.

HINTS FOR AUTOMATIC

TIMER RECORDING

•Make sure the channel you want to record is prop- erly set in advance.

TO CANCEL THE AUTO RETURN MODE

Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button. Then, press the MENU button on the remote control to return to TV mode.

If there is a power failure of any kind, the unit will retain its memory for this feature.

• It is not necessary to press the RECORD button for		WAKE UP TIMER
timer recording.
• Recording begins automatically at the Start time.		The Wake Up Timer function turns on the TV/VCR
• If you are recording using a Timer mode, you may		without using the POWER button after a desired
not operate the unit manually.		period of time.
• The erase-prevention tab on the cassette must be in		NOTES:
place (or you must put tape over the hole).		• Use the remote control for this procedure.
• If the erase-prevention tab is removed, the cassette		• Clock must be set to the correct time before setting
will be ejected when the POWER button is pressed		the timer.
to off.		• If you want to select [TAPE], you must insert a
• If the tape runs out before the end time, the		cassette tape in the TV/VCR. The tape will start
TV/VCR will switch to the Stop mode immediate-		playback automatically on your desired time.
ly, and the tape will be ejected.
		1 Select “WAKE UP TIMER”
AUTO RETURN
		Press the WAKE-UP/SLEEP button
With this feature, after timer recording is finished,		on the remote control once, and
		confirm “ON/OFF” is pointed.
the beginning of the recorded program(s) can be
		Press the F.FWD/B or REW/s	WAKE UP BON/OFF		[ON]
searched for automatically.			TIMER	TV/TAPE	[TV]
		button until [ON] appears.		TIME	[12:00AM]
1 Select “USER’S SET UP”
		2 Select “TV” or “TAPE”
Press the MENU button on the	– M E N U –
	TIMER PROGRAMMING	Press the PLAY/K or STOP/L but-
remote control.	PICTURE CONTROL
	SETTING CLOCK	ton until it points to “TV/TAPE”.
	B USER’S SET UP
Press the PLAY/K or STOP/L but-	CHANNEL SET UP
	LANGUAGE [ENGLISH]	Press the F.FWD/B or REW/s
	TIME SEARCH
ton to point to “USER’S SET UP”.	ZERO RETURN
		button, and select [TV] or [TAPE].	TIMER	BTV/TAPE	[TV]
Then, press the F.FWD/B button.			WAKE UP	ON/OFF	[ON]
				TIME	[12:00AM]
	- 22 -				EN

9J27