RECORDING
TWO DIFFERENT TAPE SPEEDS
ERASE PREVENTION
Before recording, select the tape speed from : SP mode (Standard Play) or SLP mode (Super Long Play).
The table below shows the maximum recording/play- back time using T60, T120 or T160 tapes in each mode.
Tape Speed | Recording/Playback Time | ||
Type of tape | T60 | T120 | T160 |
You can prevent accidental erasing of recording by breaking off the tab on the back edge of the cassette.
Tab |
SP mode | 1 hour | 2 hours | |
SLP mode | 3 hours | 6 hours | 8 hours |
Note: You can play back a tape recorded in LP mode (Long Play).
If you decide to record on the tape again, cover the hole with plastic tape.
Plastic Tape
Make sure ...
•TV/VCR power must be turned on.
•Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)
NOTE: This unit will ONLY record and view the same channel.
NORMAL RECORDING
You can ONLY watch the same TV program that is being recorded.
SKIPPING UNWANTED
SCENES DURING RECORDING
Press the PAUSE/STILL button to | PAUSE |
| |
temporarily stop recording. |
|
1Select the channel to be recorded
Press the number buttons on the | CH 10 |
remote control or the CHANNEL |
|
Kor L button.
Remember: If the TV/VCR is con- nected to a cable box or satellite box, the TV/VCR must be on CH3
or CH4, then the channel to be recorded must be selected on the cable box or satellite box.
2Select the tape speed
Press the SPEED button to select the desired tape speed (SP/ SLP).
SP
3 Begin recording | REC |
Press the RECORD button.
SP
4Stop recording
Press the STOP button when recording is completed.
Press the PAUSE/STILL or RECORD button to resume record-
ing.SP
NOTES:
•After five minutes, the TV/VCR will automatically switch to the Recording mode to prevent tape dam- age.
•If “CLOSED CAPTION (ON)” is selected, the On- Screen Display will appear for 5 seconds, then dis- appear.
OTR (One Touch Recording)
This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/VCR.
Make sure ...
•TV/VCR power must be turned on.
•Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)
NOTES:
•This function CANNOT be done from the remote control.
•Recording starts immediately when the REC/OTR button is pressed.
- 20 - | EN |