Sylvania W6313CB Copying a Video Tape, Sleep Timer, To Cancel the Wake UP Timer, Sp/Slp

SLEEP TIMER [2:00]

1 Select “WAKE UP TIMER”
Press the WAKE-UP/SLEEP button
on the remote control once, and
confirm “ON/OFF” is pointed.	WAKE UP BON/OFF		[ON]
Press the F.FWD/B or REW/s	TIMER	TV/TAPE	[TV]
		TIME	[12:00AM]
button until [ON] appears.
2 Select “TV” or “TAPE”
Press the PLAY/K or STOP/L but-
ton until to point to “TV/TAPE”.
Press the F.FWD/B or REW/s	WAKE UP	ON/OFF	[ON]
	TIMER	BTV/TAPE	[TV]
button, and select [TV] or [TAPE].		TIME	[12:00AM]
3 Set wake up time
Press the PLAY/K or STOP/L but-
ton until to point to “TIME”.
Press the F.FWD/B or REW/s
button until your desired wake up	WAKE UP	ON/OFF	[ON]
time appears.
	TIMER	BTIME	[12:00AM]
		TV/TAPE	[TV]

Each additional push will increase (or decrease) the time by 10 minutes.

4Exit the Wake Up Timer setting

Press the MENU button on the remote control to return to TV mode.

TO CANCEL THE WAKE UP TIMER

Press the WAKE-UP/SLEEP button on the remote con- trol once, and confirm “ON/OFF” is pointed. Press the F.FWD/B or REW/s button until [OFF] appears.

SLEEP TIMER

The Sleep Timer function turns off the TV/VCR without using the POWER button after a desired period of time.

NOTE:

•This function does not operate during Recording mode.

1Select “SLEEP TIMER”

Press the WAKE UP/SLEEP button on the remote control until “SLEEP TIMER” appears.

2Set sleep time

Press the PLAY/K, STOP/L, F.FWD/B or REW/s button until your desired sleep time appears. Each additional push will increase

the time by 30 minutes up to 120 minutes.

Press the MENU button on the remote control to exit the Sleep Timer setting.

TO CANCEL THE SLEEP TIMER

Press the WAKE UP/SLEEP button on the remote control until “SLEEP TIMER” appears.

To view the time left for sleep timer, press the WAKE-UP/SLEEP button twice, then press the MENU button on the remote control to exit the sleep timer setting.

COPYING A VIDEO TAPE

You can make copies of video tapes made by friends or relatives for your enjoyment.

Connect your TV/VCR and a Source (Playing) VCR using the following diagram.

WARNING: Unauthorized recordings of			1)Insert a pre-recorded video cassette into the Source
			(Playing) VCR or camcorder.
copyrighted video tapes may be an
			2)Insert a blank video cassette, or one you want to
infringement of copyright laws.
			record over, into the TV/VCR’s cassette compart-
			ment.
AUDIO	VIDEO STOP/EJE		3)Press the SPEED button on remote control for the
EARPHONE	[The TV/VCR]		TV/VCR to select the desired recording speed
			(SP/SLP).
			4)Press the CHANNEL K or L button on the
			TV/VCR until “AUX” appears on the screen.
			NOTE: “AUX” is found below the lowest memo-
	[Ex: Source (playing)		rized channel. (Example: CH2)
			5)Press the RECORD button on the TV/VCR.
	VCR or camcorder]		6)Begin playback of the tape in the source (Playing)
			VCR or camcorder.
Audio/Video	VIDEO		NOTE: For best results during dubbing, use the
adapter cable			TV/VCR’s front panel controls whenever possible.
(not supplied)	OUT	IN	The remote control might affect the source (Playing)
	AUDIO		VCR’s playback operation.

- 24 - EN

01A11