Sylvania SRC21135 Normal Playback, Mpaa Rating SET UP, Inserting a Cassette, Precautions

4Exit the V-Chip setting mode

Press the MENU button on the remote control to return to original mode.

MPAA RATING SET UP

Make sure ...

•TV/VCR power must be turned on.

3Select your desired item

Press the PLAY/K or STOP/L but-		G	[VIEW]
		PG	[VIEW]
ton to point to your desired item.		PG–13	[VIEW]
		NC–17	[BLOCK]
		B R	[BLOCK]
Then, press the F.FWD/B button		X	[BLOCK]
to select [BLOCK] or [VIEW].
Selection	Rating Category Explanations
G	General Audience
PG	Parental Guidance suggested.
PG-13	Unsuitable for children under 13

1Select “V-CHIP SET UP”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L but- ton to point to “V-CHIP SET UP”. Then, press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP USER’S SET UP

BV-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH INDEX SEARCH

RRestricted; under 17 requires accompa- nying parent or adult guardian

NC-17 No one under 17 admitted

X	Mature audience only
• When you select the rating category and turn it
[BLOCK], the higher rating will turn [BLOCK]
automatically. Also, the lower rating will turn

2 Select “MPAA RATING” – V-CHIP SET UP –

TV RATING

Press the PLAY/K or STOP/L but- B MPAA RATING ton to point to “MPAA RATING”.

Then, press the F.FWD/B button.

[VIEW] automatically.

• When you turn “G” to [VIEW], then all ratings

will turn to [VIEW] automatically.

4Exit the V-Chip setting mode

Press the MENU button on the remote control to return to original mode.

PLAYBACK

This TV/VCR will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes.

INSERTING A CASSETTE

Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the TV/VCR. The TV/VCR will automatically turn on.

Window

CORRECTWRONG

PRECAUTIONS

•Avoid moisture. Moisture condensation may occur on the tape if it is moved from a cold place to a warm place or visa versa. Before using a tape with these conditions, to avoid damage of the tape and your TV/VCR, wait until the tape has warmed to room temperature and the moisture has evaporated.

•Avoid extreme heat, high humidity and magnetic fields.

•Do not tamper with the cassette mechanism.

•Do not touch the tape with your fingers.

NORMAL PLAYBACK

Make sure ...

•TV/VCR power must be turned on.

1Insert a prerecorded tape

If the erase-protection tab has been removed, the TV/VCR will start playback automatically.

2 To begin playback PLAY B

Press the PLAY button.

Note: If any menu is activated on the screen, the PLAY button does not function. Press the MENU but-

ton to clear the menu, then press the PLAY button. If a tape is already in the TV/VCR with the power off, do either of the following:

A)Press the PLAY button on the TV/VCR. Power will automatically turn on and playback will start.

B)Press the POWER button on the remote control to turn the TV/VCR on, then press the PLAY button on the remote control and playback will start.

- 17 - EN

8H30