Sylvania SSC130B owner manual Zero Return, Time Search

SEARCH

Make sure ...

•TV/VCR power must be turned on.

•Insert a tape.

ZERO RETURN

This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding.

NOTE:

Zero Return WILL NOT work on a blank tape or a blank portion of a tape.

•This function will not operate in recording mode.

•This function is not operative when a cassette tape is not inserted in the TV/VCR.

In the example below: To watch a program after 2 hour 50 minutes from the present position, in either direction.

1Insert a tape.

1Stop a tape at your desired point

Rewind or fast forward the tape to the beginning point at which you want to review.

2Reset the counter to 0:00:00

Press the COUNTER RESET button repeatedly.

2Select “TIME SEARCH” mode

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L but- ton to point to “TIME SEARCH”. Then, press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

BTIME SEARCH INDEX SEARCH

3Begin recording or playback

Press the RECORD or PLAY button.

Press the STOP button when recording or playback is completed.

4To activate “ZERO RETURN” mode

Press the MENU button on the	– M E N U –
remote control.	TIMER PROGRAMMING
	PICTURE CONTROL
	SETTING CLOCK
Press the PLAY/K or STOP/L but-	CHANNEL SET UP
	USER’S SET UP
ton to point to “ZERO RETURN”.	V-CHIP SET UP
	LANGUAGE [ENGLISH]
	CAPTION [OFF]
Then, press the F.FWD/B button.	B ZERO RETURN
	TIME SEARCH
	INDEX SEARCH

The counter will appear on the TV screen.

The tape will automatically stop when the counter returns to 0:00:00.

TIME SEARCH

The Time Search function makes it possible to quick- ly advance the tape to your desired position simply by entering the exact amount of playback time you want to skip.

NOTES:

•Time Search can be set up to a maximum of 9 hours 50 minutes (9:50) by 10 minutes at a time.

3Enter your desired time

Press the PLAY/K or STOP/L but-

TIME SEARCH

ton until your desired time appears. 2 : 50

(Example: “2:50” stands for 2 hours 50 minutes)

If you wish to cancel the Time

Search at this point, press the MENU button on the remote control.

4Begin Time Search

By pressing the REW/s or F.FWD/B button, the TV/VCR will rewind or fast forward to the specified point.

The time counts down as the searching progresses. When 0:00 is reached, the tape will start playback automatically.

TO CANCEL THE TIME SEARCH at this point

Press the STOP/EJECT button on the TV/VCR or the remote control. This will delete the selected time.

- 23 - EN

0M05