Sylvania W6313CC owner manual Timer Recording, Channel CH61 Tape Speed SP

•When the REC/OTR button is pressed 18 times, the TV/VCR returns to the Normal Recording mode.

•To stop the OTR operation, press the STOP button on the TV/VCR or on the remote control.

•To show the remaining time, press the DISPLAY button on the remote control so that “OTR” appears on the TV screen. (It will show up momentarily then disappear.)

•Recording stops when 0:00 is reached.

•Please note that in the SLP mode maximum recording time, assuming the tape is started at the beginning, is 8 hours using T-160 (or 6 hours using T-120).

•If the tape runs out before the end time, the TV/VCR will switch to the Stop mode immediate- ly, eject the tape and turn itself off.

1Select the channel to be recorded

Press the number buttons on the remote control or the CHANNEL K or L button.

Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR must be on CH3 or CH4, then the channel to be recorded is selected on the cable box or satellite box.

2Select the tape speed

Press the SPEED button to select the desired tape speed (SP/ SLP).

3Begin OTR

OTR(2 : 30)

Press the REC/OTR button on the

TV/VCR as many times as needed.

The recording length will be deter-

In the example below, the timer is being set to record:

DATE: July 5th, 2002

SETTING TIME: from 7:30PM to 8:50PM

CHANNEL: CH61

TAPE SPEED: SP

Make sure ...

•If your TV/VCR is connected to a cable or satellite box, you must set the TV/VCR to channel 3 or 4 to match the output channel of the box.

•Clock is set to the correct time and date before set- ting the timer.

•TV/VCR power is turned on to program it.

•To insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.)

•To set the channel you want to record

Avoid overlap of programs ...

There is a chance that a program will not be record- ed. When programs overlap:

•The program with the earliest start time will record first.

•Once the earliest program finishes recording, the overlapping programs will record in the order of the program number.

•The illustration below demonstrates the sequence of recording.

Recording Sequence

Program 1 10:00AM-11:00AM Program 2 9:00AM-10:00AM Program 3 9:30AM-12:00PM

9:00AM 10:00AM 11:00AM 12:00PM

*Recording period is SHADED

mined by the number of times you press the REC/OTR button. Each

SP

1Select “TIMER PROGRAMMING”

additional push will increase the recording time by 30 minutes. It is set up to 8 hours.

Push(es)	Display	Recording length
1 push		(continuous recording)
2 pushes	0:30	30 minutes
3 pushes	1:00	60 minutes
4 pushes	1:30	90 minutes
17 pushes	8:00	480 minutes

TIMER RECORDING

You may set the TV/VCR to start and end a record- ing while you are away. You can set 8 programs to record on specific days, daily or weekly within a 1 year period.

Press the MENU button on the	– M E N U –
remote control.	B TIMER PROGRAMMING
	PICTURE CONTROL
	SETTING CLOCK
Confirm “TIMER PROGRAM-	CHANNEL SET UP
	USER’S SET UP
MING” is pointed to by pressing	V-CHIP SET UP
	CAPTION [OFF]
	LANGUAGE [ENGLISH]
the PLAY/K button.	ZERO RETURN
	TIME SEARCH

Ppress the F.FWD/B button.

•If you have not yet set the clock, “MANUAL CLOCK SET” appears. If so, follow stops [3] to [8] on page 11. Then set the timer recording.

2 Select your desired program	– TIMER PROGRAMMING –
position (1~8)	CH DATE		BEGIN END
	- -	-/- - - - -	-:- -	-:- - - -
Press the PLAY/K or STOP/L but-	- -	-/- - - - -	-:- -	-:- - - -
	- -	-/- - - - -	-:- -	-:- - - -
	B - -	-/- - - - -	-:- -	-:- - - -
ton to select the desired program	- -	-/- - - - -	-:- -	-:- - - -
	- -	-/- - - - -	-:- -	-:- - - -
	- -	-/- - - - -	-:- -	-:- - - -
position.	- -	-/- - - - -	-:- -	-:- - - -

Then, press the F.FWD/B button.

- 21 - EN

01A11