Sylvania W6313CC Copying a Video Tape, Sleep Timer, To Cancel the Wake UP Timer, Sp/Slp

SLEEP TIMER [2:00]

1 Select “WAKE UP TIMER”
Press the WAKE-UP/SLEEP button
on the remote control once, and
confirm “ON/OFF” is pointed.	WAKE UP B ON/OFF		[ON]
Press the F.FWD/B or REW/s	TIMER	TV/TAPE	[TV]
		TIME	[12:00AM]
button until [ON] appears.
2 Select “TV” or “TAPE”
Press the PLAY/K or STOP/L but-
ton until it points to “TV/TAPE”.
Press the F.FWD/B or REW/s	WAKE UP	ON/OFF	[ON]
	TIMER	B TV/TAPE	[TV]
button, and select [TV] or [TAPE].		TIME	[12:00AM]
3 Set wake up time
Press the PLAY/K or STOP/L but-
ton until it points to “TIME”.
Press the F.FWD/B or REW/s
button until your desired wake up	WAKE UP	ON/OFF	[ON]
time appears.
	TIMER	B TIME	[12:00AM]
		TV/TAPE	[TV]

Each additional push will increase (or decrease) the time by 10 minutes.

4Exit the Wake Up Timer setting

Press the MENU button on the remote control to return to TV mode.

TO CANCEL THE WAKE UP TIMER

Press the WAKE-UP/SLEEP button on the remote con- trol once, and confirm “ON/OFF” is pointed. Press the F.FWD/B or REW/s button until [OFF] appears.

SLEEP TIMER

The Sleep Timer function turns off the TV/VCR without using the POWER button after a desired period of time.

NOTE:

•This function does not operate during Recording mode.

1Select “SLEEP TIMER”

Press the WAKE UP/SLEEP button on the remote control until “SLEEP TIMER” appears.

2Set sleep time

Press the PLAY/K, STOP/L, F.FWD/B or REW/s button until your desired sleep time appears. Each additional push will increase

the time by 30 minutes up to 120 minutes.

Press the MENU button on the remote control to exit the Sleep Timer setting.

TO CANCEL THE SLEEP TIMER

Press the WAKE UP/SLEEP button on the remote control until “SLEEP TIMER” appears.

To view the time left for sleep timer, press the WAKE-UP/SLEEP button twice, then press the MENU button on the remote control to exit the sleep timer setting.

COPYING A VIDEO TAPE
You can make copies of video tapes made by friends			1)Insert a pre-recorded video cassette into the Source
or relatives for your enjoyment.			(Playing) VCR or camcorder.
WARNING: Unauthorized recordings of			2)Insert a blank video cassette, or one you want to
			record over, into the TV/VCR’s cassette compart-
copyrighted video tapes may be an
			ment.
infringement of copyright laws.
			3)Press the SPEED button on remote control for the
Connect your TV/VCR and a Source (Playing) VCR
			TV/VCR to select the desired recording speed
using the following diagram.			(SP/SLP).
VIDEO AUDIO	[The TV/VCR]		4)Press the CHANNEL K or L button on the
			TV/VCR until “AUX” appears on the screen.
			NOTE: “AUX” is found below the lowest numbered
			memorized channel. (Example: CH2)
			5)Press the RECORD button on the TV/VCR.
			6)Begin playback of the tape in the source (Playing)
			VCR or camcorder.
[Ex: Source (playing)			NOTE: For best results during copying, use the
VCR or camcorder]			TV/VCR’s front panel controls whenever possible.
			The remote control might affect the source (Playing)
Audio/Video	AUDIO		VCR’s playback operation.
adapter cable	OUT	IN
(not supplied)	VIDEO

- 24 - EN

01A11