On Screen Display, Special Features, Maintenance

ON SCREEN DISPLAY

To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote control. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows:

•

Counter mode: After 5 seconds, only	<Off mode>	<Counter mode>	<Clock mode>
the counter remains. To clear it, press			5:40PM
the DISPLAY button.			CH2
the DISPLAY button.

Clock mode: After 5 seconds, only	Press	Press
the clock and the channel number	once	once
remain. To clear them, press the DIS-		COUNT 0:12:34
PLAY button.


		Press once

SPECIAL FEATURES

REAL TIME TAPE COUNTER

This shows the elapsed recording or playback time in hours, minutes, and seconds. (The displayed time will not change on a blank tape or blank portions on the tape.)The “–” indication will appear when the tape has rewound further than “0:00:00” on the tape counter.

AUTO REWIND-EJECT

•When the end of a tape is reached during record- ing, playback, or fast-forward, the tape will auto- matically rewind to the beginning. After rewinding finishes, the TV/VCR will eject the tape and turn itself to off.

•This function is operative when Repeat Play is set to the [OFF] position.

•The tape will not auto-rewind during timer record- ing or One Touch Recording.

MAINTENANCE

CABINET CLEANING

•Wipe the front panel and other exterior surfaces of the TV/VCR with a soft cloth immersed in luke- warm water and wrung dry.

•Never use a solvent or alcohol. Do not spray insec- ticide liquid near the TV/VCR. Such chemicals may cause damage and discoloration to the exposed surfaces.

AUTO HEAD CLEANING

•Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture.

•Playback picture may become blurred of interrupt- ed while the TV program reception is clear. Dirt accumulated on the video heads after long periods of use, or the usage of rental or worn tapes can cause this problem.

If a streaky or snowy picture appears during play- back, the video heads in your TV/VCR may need to be cleaned.

1.Please visit your local Audio/Video store and pur- chase a good quality VHS Video Head Cleaner.

2.If a Video Head Cleaner does not solve the prob- lem, please call our help line at 1-800-968-3429, to locate an Authorized Service Center.

NOTES:

•Remember to read the instructions included with the video head cleaner before use.

•Clean video heads only when problems occur.

SERVICING

•Should your TV/VCR become inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power cord, and please call our help line at 1-800- 968-3429, to locate an Authorized Service Center.

- 24 -

9J27