JVC TV-20F243 manual Remote Programming, Press Return to exit

REMOTE PROGRAMMING

Setting the CATV or Satellite receiver

You can program your remote to operate your cable box, satellite receiver by using the instructions and codes listed below. If the equipment does not respond to any of the codes listed below or to the search code function, use the remote control supplied by the manufacturer.

Cable Box or Satellite setup

The remote control is programmed with CATV and/or Satellite codes for power on, power off, channel up, channel down, and 10 key operation.

1.Find the CATV/Satellite brand from the list of codes shown below.

2.Slide the 2-way selector switch (TV/CATV switch) to “CATV”.

3.Press and hold down the CALL button.

4.With the CALL button held down, enter the first code number listed using the 10 key pad.

5.Release the CALL button.

6.Confirm the operation of the Cable Box/Satellite receiver.

•If your CATV or Satellite box does not respond to the first code, try the others listed. If it does not respond to any code, try the Search Codes Function at the bottom of the page.

Cable Box	CODES	Cable Box	CODES	Digital	CODES
				Satellite
ABC	024	Puser	032
				System
Archer	032, 025	RCA	061, 070
Cableview	051, 032	Realistic	032	Echostar	100, 113, 114
Citizen	022, 051	Regal	058, 064, 040, 041, 042, 045,	Express VU	100, 113
Curtis	058, 059		068	G.E.	106
Dlamond	024, 032, 025	Regency	034	G.I.	108
Eagle	029	Rembrandt	037, 032, 051, 038	Gradiente	112
Eastern	034	Samsung	051	Hitachi	104, 111
GC Brand	032, 051	Scientific Atlanta	057, 058, 059	HNS (Hughes)	104
Gemini	022, 043	SLMark	051, 047	Panasonic	105
General instrument	065, 024, 025, 026, 027, 020,	Sprucar	051, 066	Philips	102, 103
	021, 022, 057, 023	Strargate	032, 051	Primestar	108
Hamlin	040, 041, 042, 045, 058, 064	Telecaption	067	Proscan	106, 109, 110
Hitachi	049, 024	Teleview	047, 051	RCA	106, 109, 110
Jerrold	065, 024, 025, 026, 027, 020,	Texscan	044	Sony	107
	021, 022, 057, 023	Tocom	035, 036, 066	Star Choice	104, 108
Macom	049, 050,051,054	Toshiba	050	Toshiba	101
Magnavox	033	Unika	032, 025	Uniden	102, 103
Memorex	030	Universal	022, 032
Movietime	032, 051	Videoway	052
Oak	039, 037, 048	Viewstar	029, 030
Panasonic	055, 056, 060, 071	Zenith	063, 046
Paragon	063	Zenith/Drake	046
Philips	028, 029, 030, 052, 053, 031, 069	Satellite
Pioneer	047, 062
Pulsar	051, 032

Search Codes Function:

1.Slide the 2-Way Mode Selector switch (TV/CATV switch) to CATV.

2.Press the TV POWER and RETURN buttons. Hold for at least three seconds and release.

3.Press TV POWER, see if the CATV or Satellite box responds.

4.If there was a response, press RETURN. The operating codes are now set. If there was no response, repeat Step 3. If you repeat Step 3 52 times without a response, use the remote control which came with the equipment.

5.Press RETURN to exit.

11