JVC TV 13140 Using the Real Time Tape Counter, Using Zero Return, To View the Counter Display

I%1

USING THE REAL TIME TAPE COUNTER

The Co-Screen Real "rimeTape Counter shows the tape running t_ne in Hours, Minutes and Seconds. You can easily determine how long the tape has been running or how much time is le0 on the tape.

TO VIEW THE COUNTER DISPLAY

Bress the CALL butthnto display the Real T_me

Tape Counter.

CALL	RESET
%	COUNTER --_

USING ZERO RETURN

The zero reture function provides a convenient method of rapidly returning to the starting point of recording or

playback. The starting point can be indexed for any location on the tape by pressing the COUNTER RESET button and COUNTER ZERO RETURN button.

B	Press the CALL button to display the counter.	___	COUNTER RESET button to set the counter
			Before playback or recording, press the
			to "00:00:00".
	CALL		RESET
	%		COUNTER --_

1B

Begin Playback or Recording to start the tape,				Press the STOP button.
		hen you wish to make the countar disap*	Begin playback or recordiog.	_,g_ll buttonPress .theTheZEROtape willRETURNrewind•
the counter will display the elapsed time.	_J
		pear, press the CALL burton once again.		and automatically stop at
				the "00:00:00" position.

	%	ZERO
CALL
%or%÷% %		COUNTER
		_u

NOTE: • If you rewind the tape from "00:00:00", a minus sign (=-") will be displayed in front of the time.

•When you load a tape, the counter will reset to "00:00:00 _.

•The counter does not function on nonrecorded (blank) sections of the tape. When you rewind, fast forward or play tapes through blank sections, the counter stops.

40 41