Memorex MVT2090 owner manual Cable TV Connections, Setting the Language

CABLE TV CONNECTIONS

This TV/VCR has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some cable companies offer "premium pay channels" in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company.

FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE

For basic cable service not requiring a Converter/Descrambler box,

connect the CATV 75 ohm Coaxial Cable directly to the Antenna Jack

on the back of the TV/VCR. 75 ohm

Coaxial Cable

Antenna Jack

UHF/

VHF

FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE

If you subscribe to a cable TV service which requires the use of a Converter/Descrambler box, connect the incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial Cable, connect the output jack of the Converter/Descrambler box to the Antenna Jack on the TV/VCR. Follow the connections shown below. Set the TV/VCR to the output channel of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/ Descrambler box to select channels.

Incoming 75 ohm	Antenna Jack
CATV cable	75 ohm Cable to TV/VCR
	Converter/Descrambler
	UHF/
	VHF

FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH SCRAMBLED PREMIUM CHANNELS

If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the use of a Converter/Descrambler box, you may wish to use a signal splitter and an A/B Switch box (available from the Cable company or an electronics supply store). Follow the connections shown below. With the switch in the "B" position, you can directly tune any nonscrambled channels on your TV/VCR. With the switch in the "A" position, tune your TV/VCR to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/ Descrambler box to tune scrambled channels.

Incoming	Converter/Descrambler				Antenna Jack
75 ohm				75 ohm cable
CATV cable	Splitter	A/B Switch	A	to TV/VCR
				B
					UHF/
					VHF

SETTING THE LANGUAGE

This TV/VCR can display the on screen language in English, Spanish or French.

On-screen language selection (step 3) will automati- cally appear on the screen when you press the MENU button initially. Select the language you prefer first, then proceed with the other menu options.

1 Press the MENU button.		M E N U
Press the SET/TRACKING + or –		TIMER REC SET
		TV SET-UP
button to select the SYSTEM		CH SET-UP
		AUTO REPEAT ON OFF
SET-UP option, then press the		SYSTEM SET-UP
ENTER button.	〈+/–/ENTER/MENU〉

12

2Press the SET/TRACKING + or

–button to select the LAN- GUAGE option, then press the ENTER button.

3Press the SET/TRACKING + or

–button to select the desired language: English (ENGLISH), Spanish (ESPAÑOL) or French (FRANCAIS), then press the ENTER button.

4Press the MENU button until the MENU screen is cleared.

SYSTEM SET-UP

CLOCK SET

LANGUAGE/IDIOMA/LANGUE

AUTO CLOCK ON OFF

STANDARD TIME DAYLIGHT SAVING TIME

〈+/–/ENTER/MENU〉

LANGUAGE/IDIOMA/LANGUE

ENGLISH

ESPAÑOL

FRANCAIS

〈+/–/ENTER/MENU〉

5B01201A E P12-19 12 04/04/2002, 17:49