Memorex MVT2090 owner manual Symptom Cause Possible Solution, Recording, Playback, Remote Control

SYMPTOM	CAUSE	POSSIBLE SOLUTION	PAGE
	TV station stopped broadcasting.	Tune new channel.	14
TV shuts off.
	Sleep timer is set.	Set Sleep Timer to "0".	15
	OFF timer is set.	Cancel OFF timer.	19
No reception	Lost your password.	Reset your password.	17
	TV station experiencing problems or	Try another channel.	14
	program tuned is not closed captions.
Closed caption is not	TV signal is weak.	Check CATV connection of VHF/
		UHF antenna, reposition or rotate	11,12
activated.
		antenna.
	The TV/CAP/TEXT button is not	Press the TV/CAP/TEXT button to	15
	depressed.	turn on the closed caption.
RECORDING
TV recording does not work.	The video cassette's erase prevention	Place a piece of vinyl tape over the	20
	tab is broken off.	hole.
	The time is not set correctly.	Reset the present time.	14
Timer recording does not	The recording start/end time is not	Reset the start/end time.	22
	set correctly.
work.
	The TIMER REC button has not been	Press the TIMER REC button (The	22
	pressed (The T-REC indicator is not lit).	T-REC indicator is lit).
PLAYBACK
	Tape is old or worn.	Replace the tape.	—
Noise bars appear on the	Tracking adjustment is beyond range	Adjust tracking manually using the
	of automatic tracking circuit.	SET/TRACKING + or – buttons on	20
screen.
		the remote control.
	Video heads are dirty.	Clean the video heads.	25

REMOTE CONTROL

ENGLISH

Remote control does not operate.

The remote control is not aimed at	Aim the remote control at the	10
the sensor.	remote sensor.
Distance is too far or too much light	Operate within 15 feet or reduce	10
in the room.	the light of the room.
There is an obstacle in the path of	Clear the path of the beam.	10
the beam.
The batteries are weak.	Replace the batteries.	10
The batteries are not inserted	Insert correctly.	10
correctly.

27

5B01201A E P20-Back 27 04/04/2002, 17:48