11.Diagnostic LED – The Diagnostic LED may flash when the TeraStation encounters an error. In this event, please contact our 24/7 technical support at (866)
12.Power – This LED glows a steady green while the TeraStation is operating normally. It blinks quickly during bootup and shutdown, and slowly while the TeraStation is in sleep mode.
13.Link/Act – This LED will glow when the TeraStation is connected to a network, and blink during normal network activity. It changes color to indicate the speed of the connection: blue for a 1000Mbps connection, green for 100Mbps, and red for a 10Mbps connection.
14.Power Socket – Plug the power cord into this socket.
TeraStation Diagram
15.Power Switch – This is the TeraStation’s master power switch. While it is on, the power button on the front panel of the TeraStation may be used to start and shut down the unit. When this switch is off, no power goes to the unit. If this switch is left off for an extended period of time, the TeraStation’s internal system clock may need to be reset.
16.Internal Fan – The internal fan will adjust its speed according to the temperature inside the TeraStation. To prevent possible overheating, keep the fan clear and clean of obstacles or dust.
17.INIT Button – The INIT button restores your TeraStation to factory default settings. See page 54 for more information on using the INIT button.
22