Replacing a Hard Drive
If a STATUS/FULL LED is blinking, note the drive number before continuing. Use a clean, padded work area to dissassemble your TeraStation. You’ll need a #2 phillips screwdriver. You will be removing and replacing a total of 22 screws to replace a hard drive, so keep each screw that you remove carefully in a safe place. Be careful not to drop the TeraStation, or cut yourself on sharp interior metal parts. Buffalo Technology is not responsible for any damage that you do to yourself or your TeraStation while changing out a hard drive! Be careful.
1 Remove all cables and place the unit on its top, exposing the four rubber feet.
2 Remove the rubber feet. Each foot is held in place by one screw.
M3 Screw 6mm
73