Alpine PXI-H990 manual Mounting Microphone, Mounting Location

Page 10

3.Place two base units side by side, and attach the brackets with the supplied bracket pan head screws (M4 x 8).

Bracket pan head screw (M4 x 8)

4. Refer to “Mounting the base unit” on page 7, and firmly attach the base.

When using two PXI-H990s, change the System switch on the base unit to

Memo

“DUAL”. (For Basic Connections Diagram, refer to page 10)

 

Mounting Microphone

Mounting Location

Mount the microphone on the rear-view mirror, headrest, sun visor, or other appropriate location.

We recommend that you mount it on the sun visor.

1.Attaching the microphone

After mounting the microphone, use the supplied cord clamp to dress the microphone cable.

You can use the internal microphone in the monitor (TMI-M990, sold separately) as a Road EQ Microphone. For more details about connecting, refer to “Examples of system expansion” (page 13).

When connecting two PXI-H990s, connect the microphones to both units. In this case, the mouting location of two microphones should be the same.

When connecting two PXI-H990s, the Road EQ microphone built in the monitor (TMI-M990, sold separately) cannot be used.

9-EN

Image 10
Contents PXI-H990 Alpine Electronics MARKETING, INC Points to Observe for Safe Usage Meaning of displaysPage Temperature Wiring ConnectionsFuse To prevent external noise from entering the audio system Accessories Mounting the base unit Tapping screws M4 xSetting up two PXI-H990s Mounting Microphone Mounting LocationTop view Basic Connections DiagramBase section Terminal specification Connect to Side Panel12-EN 13-EN
Related manuals
Manual 116 pages 10.17 Kb