Alpine PXI-H990 guide

DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES. When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS. Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.

DO NOT BLOCK VENTS OR RADIATOR PANELS. Doing so may cause heat to build up inside and may result in fire.

KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN. Swal- lowing them may result in serious injury. If swallowed, consult a physician immediately.

DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR GEARSHIFT. Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

Caution

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.

USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY. Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE. Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST. Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure.

3-EN

PXI-H990 specifications

The Alpine PXI-H990 is a state-of-the-art embedded computing platform designed to meet the demanding requirements of modern testing and measurement applications. As part of the PXI (PCI eXtensions for Instrumentation) standard, the PXI-H990 incorporates modularity, high-performance, and scalability, making it an ideal solution for engineers and researchers in various industries including telecommunications, aerospace, and automotive.

One of the standout features of the Alpine PXI-H990 is its powerful processing capabilities. It utilizes a multi-core processor architecture that ensures efficient data handling and processing, crucial for real-time applications. The device supports high-speed data acquisition, helping engineers achieve accurate measurements and reduce testing time.

The PXI-H990 comes equipped with flexible I/O options that allow users to customize the platform according to specific application needs. Its slots support a wide range of modules, including those for signal generation, analysis, and data logging. This versatility ensures that systems can be tailored for diverse tasks without the need for extensive hardware changes.

The architecture of the PXI-H990 allows for high-speed communications between modules, enabled by the PXI backplane. This interconnectivity facilitates synchronized operation, enhancing timing accuracy, which is especially important in applications such as radar and communication systems testing. Furthermore, the device’s built-in synchronization capabilities allow for precise control over multiple instruments and measurements.

On the connectivity front, the PXI-H990 supports various interfaces, including USB, Ethernet, and Serial. This ensures seamless integration with other equipment and facilitates easy data transfer. The device also comes with advanced software support, enabling users to leverage powerful programming environments for automation, scripting, and analysis.

Additionally, the Alpine PXI-H990 is designed with durability and reliability in mind. It features rugged construction, ensuring it can withstand challenging operational environments. This reliability is further enhanced by built-in cooling systems that maintain optimal operating temperatures, even during intensive data processing tasks.

In conclusion, the Alpine PXI-H990 stands out for its combination of high performance, modularity, and flexibility. Its advanced processing capabilities, extensive I/O options, and robust architecture make it a leading choice for engineers and organizations looking for reliable embedded solutions in testing and measurement applications.