RS232 |
POWER |
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
NV-NV-MPS4 Music Port Server Front Panel Features
1.Power: This button supplies power to the Music Port Server when the unit is plugged into an AC power source and the button is pushed. The associated blue LED will light.
2.USB Port: This USB port allow the Music Port Server to see and stream audio content from attached drives.This feature will be available on a future release.
3.NuVoNet Error LED: The Music Port Server is designed to communicate via a CAT5 cable to the NuVo Essentia, Grand Concerto, and Renovia Distributed Audio Systems. This red LED is designed to light indicating a lack of communication.With normal communication, it will remain unlit.
4.LAN Error LED : This red LED will light when there is no Local Area Network signal present at the RJ45 Ethernet port on the Music Port back panel, or when there is an interruption in the LAN signal. See page 8, Understanding the LAN Error LED, for a detailed description of the different error states. In normal operation it will remain unlit.
5.RS232 Error LED: This red LED will light when the Music Port Server does not detect a serial connection at its DB9
output on the back panel. When a serial connection is present and active, the LED will remain unlit.
6.HDD Status LED: This green LED will light when the Music Port Server’s hard drive is active.
7.Source Address LED’s: These green LED’s 1 - 6 will light indicating the assigned source inputs on the associated NuVo Distributed Audio System.
8.Reset Button: This recessed button will reset the Music Port Server’s operating system when it is pushed.
4