Nuvo Accessing the Remote Configuration Tool at music-port/config and Understanding the LAN Error LED

Understanding the LAN Error LED

The front panel of the NV-MPS4 has a red LED designed to alert you to communication issues across its network, Fig. 5. The state of the LED indicates the nature of the problem.

LED not lit: This indicates good communication. No problem is found.

LED solid red: A cable connection at the “Ethernet” port on the back panel is not detected.

LED blinking twice: There is no WAN, Wide Area Network detected or no Internet connectivity.

LED blinking three times: This is no LAN, Local Area Network detected.

Fig. 5

RS232

LAN Error LED

Accessing the Remote Configuration Tool from the Local Area Network

Go to your computer and make sure it is connected to the same network as the NV-MPS4 (this is usually a wireless connection). Open an Internet browser window and type the default name, music-port/configin the address bar, Fig. 5.

Fig. 5

This should open the Remote Configuration Tool, Fig. 6.

Fig. 6

8