Vizio HDTV10A user manual Connecting a PC Computer, Preset PC Resolutions

VIZIO VX37L HDTV10A User Manual

2.7Connecting a PC Computer

1.Turn off the power to the HDTV and PC Computer.

2.Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of your pc computer and the other end to the RGB PC input (blue area) at the rear of the HDTV.

3.Connect the Audio Out on your pc computer to the RGB PC Audio input (blue area) at the rear of the HDTV.

4.Turn on the HDTV and PC Computer.

5.Select RGB using the INPUT button on the remote or side of the HDTV, or directly by pressing the RGB button on the Remote Control.

Note:

a)For the best picture quality when connecting a pc computer through RGB PC, set your pc computer timing mode to VESA 1366x768 at 60Hz. Please refer to the pc or graphic card’s user guide for additional information on how to set the timing mode and the video output requirements of the product.

b)A RGB (VGA) cable and stereo mini jack cable are not included and can be purchased at an electronics store.

2.7.1Preset PC Resolutions

Resolution	Refresh (Hz)	H.Freq (kHz)	V.Freq (Hz)	H.Sync	V.Sync	Pixel Freq (MHz)
640x480	60	31.5	59.94	N	N	25.175
640x480	75	37.5	75.00	N	N	31.500
720x400	70	31.46	70.08	N	P	28.320
800x600	60	37.9	60.317	P	P	40.000
800x600	75	46.9	75	P	P	49.500
800x600	85	53.7	85.06	P	P	56.250
1024x768	60	48.4	60.01	N	N	65.000
1024x768	75	60.0	75.03	P	P	78.750
*1366x768	60	47.7	60.00	P	N	85.500

NOTES: N = Negative, P = Positive, * = Primary (Native) Mode

Version 1/25/2007	23
	www.VIZIO.com