Securing Wall Mount to Wall, Wood Stud Walls

VIZIO VMT40-55M User Manual

Securing Wall Mount to Wall

Caution: This product is not designed for use in metal stud walls

Wood Stud Walls

Note: You must attach the TV wall mount to a wall that has at least 2” x 4” wood studs to avoid property damage or injury.

Locate wall studs

1.Using a stud finder, locate two wood studs that are 16” to 24” apart.

2.With a pencil, mark the location of the studs.

Mark and drill holes

1.Tape the included poster to the wall so the holes align with the studs. Use the built-in level on the wall plate [1] to make sure the poster is level. Put the wall plate [1] aside.

2.Drill 4 holes with the 3/16” drill bit, 2-1/2” deep. Remove the poster.

Anchor mount to wall

1.Using a 7/16” wrench, attach the wall plate [1] to the wall with the supplied lag bolts and washers [9] & [10].

2.Use the level before tightening bolts.

Note: Do not over-tighten lag bolts. Tighten only until they are firmly against the wall plate.

Version 6/23/2009	5
	www.VIZIO.com