VIZIO VX200E User Manual
Audio Menu
1.Press the MENU button on the remote control and the Picture menu will be shown on the screen.
2.Press ▲ or ▼ on the remote control to highlight the Audio menu, and then press MENU to select it.
3.Press ▲ or ▼ on the remote control to select an Audio menu option.
4.Once the menu option is highlighted, press ◄ or ► on the remote control to adjust the setting.
Note: Equalizer adjustments are available for you to set them to your preferred settings. Equalizer will not be available if SRS is on.
Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
Equalizer
Press the ▼ button to highlight the Equalizer selection.
1.Press the ► button to start adjusting.
2.A new menu will be displayed showing volumes of different frequencies (pitches).
3.Starting from lowest to the highest pitch, they are 120 Hz, 500Hz, 1.5 kHz, 5 kHz and 10 kHz.
4.Press the ▼ button to highlight the frequency you wish to adjust.
5.Use the ◄ or ► button to adjust for boost or attenuation. For example if you want to boost the bass you would highlight 120Hz and turn it up.
6.Once the adjustments are completed press the LAST button repeatedly to exit the OSD completely.
Balance
Adjust the sound to the left or the right.
SRS TSHD
This option sets the SRS TruSurround HD surround sound process. Choose from On or Off.
Note: When SRS TSHD is ON, Equalizer adjustments are not available.
Digital Audio Out
This option allows selection of the type of processing for the SPDIF (Optical connector) when used with a Receiver/Amplifier/Home Theater system. Select to choose from OFF, Dolby Digital or PCM.
Version 5/8/2009 | 35 |
| www.VIZIO.com |