SoundCraft Five Monitor Series manual Input Module, Input A/B B

Page 28

k

24-bus console

Input Module

1SENS (Sensitivity)

The SENSitivity Control adjusts the level of the signal which is present on the Input XLRs. The input can handle mic or line level signals up to +30dBu, with the RANGE switch (see below) selecting high or low sensitivity.

2INPUT A/B - B

Every input has A and B XLR inputs, allowing a large number of inputs to be con- nected to the console without repatching. Normally the A input is active, unless the B switch is pressed to select the alternative input.

3Ø (Phase)

The PHASE switch reverses the phase of the selected input signal, to compensate for incorrect wiring or mic placement. The switch is internally illuminated when phase is reversed.

4RNGE (Range)

The RNGE (Range) switch selects between an input range of -2dBu to -70dBu (switch released), and +10dBu to -20dBu (switch pressed and lit), enabling both mic and line level signals to be handled by a common input stage.

CAUTION: Phantom power should not be switched on when unbalanced sources are connected to the XLR input.

548V A and B

The 48V switches, when depressed, place 48V phantom power on pins 2 & 3 of the respective XLRs. Integral LEDs illuminate when the phantom power is on.

6INS (Insert Point)

The Insert Point may be switched in circuit by the INS switch. The insert uses sep- arate balanced jacks for send and return. It is normally positioned after the filter and before the equaliser, but can be repositioned using internal jumpers to be post-EQ if required. The insert is in-circuit when the switch is illuminated.

7HPF (Highpass Filter)

Two sweepable filters are provided, offering the capability of cleaning up both ends of the input signal, minimising the amount of corrective EQ which needs to be applied.

The High-pass Filter (HPF) control (upper knob) sets the cutoff (-3dB) frequency of the High-pass filter: it is adjustable between 20Hz and 600Hz. The control also has a built-in switch to switch the filter out of circuit when rotated fully anticlock- wise.

The Low-pass Filter (LPF) control (lower knob) sets the cutoff (-3dB) frequency of the Low-pass filter: it is adjustable between 1kHz and 20kHz. The control also has a built-in switch to switch the filter out of circuit when rotated fully anticlock- wise.

8EQ

The EQ section comprises four fully parametric bands, with adjustable Q. The EQ is enabled when the EQ switch is pressed, and bypassed when the switch is released. The EQ is active when the EQ switch is illuminated.

Each section has a dual concentric control providing 15dB boost or cut (upper knob) at a variable frequency (lower knob) and a separate Q control.

FIVE Monitor Functional Description

4.2

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Five Monitor Contents Five Monitor Contents Contents Five Monitor Contents Introduction Five Monitor IntroductionIntroduction Power SupplySystem Overview Warranty Five Monitor Introduction Installation Five Monitor InstallationAll dimensions are in millimeters inches in brackets DimenionsPrecautions and Safety Instructions General PrecautionsPower Supplies & cables Signal LevelsMains Installation General Wiring ProceduresInitial Wiring Considerations Audio WiringShielding Points to RememberAudio Connectors ConnectionsJumper Options Five Monitor Installation Block Diagrams Five Monitor Block DiagramsBus Mono Input Module Flash IP Solo CLR IP Solo DET Mute Group Bus Stereo Input Module Input Meters Phantom Sens On Input Fader PCB Insert LHS Multipin Upper Output Master Connector Bus Output ModuleMaster Module Insert Mode BUS Send Return Part Comms LINK/MIDI Rearcon EQ Output Functional Description Five Monitor Functional DescriptionInput Module Input A/B BHMF LMFRr Mute Mute SafeYI Mute ASN Mute Group Assignment UI VCA ASN VCA Group AssignmentRearcon Panel Input a and B XLRDirect OUT Balanced Insert Send BalancedOptional Stereo Input Module RNG Range L/R48V L and R MNO Mono L and RHMF Solo Input L and R XLR Output Module Matrix Master MuteSolo ALT SoloMetering All Output XLRs balanced Rearcon PanelsInsert Send & Return balanced Master Module PFL / AFL Section Output Section MuteExternal PFL/AFL Wedge Output Main Wedge onVCA Master Faders Five Monitor Console Logic in / Logic OUT Five Monitor Functional Description Specifications Five Monitor SpecificationsTypical Specifications

Five Monitor Series specifications

The SoundCraft Five Monitor Series represents a significant advancement in professional audio mixing technology, tailored specifically for live sound environments. Renowned for their high-quality performance and user-friendly interface, these mixing consoles are designed for sound engineers and musicians who demand reliability and flexibility.

One of the standout features of the SoundCraft Five is its ergonomic design, which prioritizes ease of use. The console layout is intuitive, allowing for quick adjustments during live performances. With strategically placed faders, knobs, and buttons, engineers can make real-time changes without losing focus on the performance, an essential characteristic for any live set.

Equipped with advanced digital signal processing (DSP), the SoundCraft Five provides unparalleled sound clarity and precision. The built-in EQ features, including parametric equalizers, allow sound engineers to tailor the audio output to the specific acoustics of the venue. This adaptability ensures that performers are always heard at their best, regardless of the environment.

Another key technology in the Five Monitor Series is the compatibility with various audio formats and protocols. Utilizing both analog and digital inputs, these consoles can seamlessly integrate into complex audio setups. This flexibility is crucial for modern performances where multiple audio sources need to be managed efficiently.

The SoundCraft Five also incorporates high-quality preamps that deliver exceptional sound quality. These preamps ensure that every detail of the audio is captured without distortion, providing a warm and professional sound that enhances the overall listening experience.

Durability is a hallmark of the SoundCraft design philosophy. The Five Monitor Series is built to withstand the rigors of touring and live events, featuring rugged construction and reliable components. This resilience ensures that the mixer will perform consistently through various demanding situations.

Furthermore, the intuitive layout includes comprehensive metering options, allowing sound engineers to monitor levels effectively. This visual feedback is vital for maintaining optimal sound quality throughout the performance, helping to avoid potential issues before they arise.

In summary, the SoundCraft Five Monitor Series stands out in the competitive landscape of live sound mixing consoles. With its combination of user-friendly design, advanced DSP technology, high-quality preamps, and robust construction, it meets the diverse needs of modern audio professionals, making it an essential tool for any live performance setup.
Top Page Image Contents