SoundCraft Five Monitor Series manual Metering

Page 38

Output Module with EQ

wØ (Phase)

Pressing the Ø (Phase) switch reverses the phase of the output, to allow experi- mentation for best feedback immunity with a multiple-mic setup. The switch is illuminated when the phase is reversed.

eINSERT (OUT)

The Insert Point consists of separate Send and Return jacks on the rear panel. The Send is normalled to the Return.

The OUT switch bypasses the Insert Point when pressed, but leaves the pre-fade output signal on the Send jack to feed external equipment if required. The switch is illuminated when the insert is bypassed.

rGRP TO L/R

The internally illuminated L and R switches route the post-mute, post-fade output signal to the last pair of output busses (designated L and R) for subgrouping. This allows the FIVE Monitor to be used as a Front-of-House mixer if necessary, sum- ming the Groups for a pair of stage fills, or perhaps giving a simple and quick method for the Monitor Engineer to make a 2-track recording of certain channels for later reference.

tSOLO TRIM

SOLO TRIM gives +/- 10dB adjustment to the signal sent from that Output to the AFL/PFL bus. This is useful for trimming a number of Outputs of varying levels to give a consistent monitor level, thus reducing the requirement for manual Wedge or ALT master adjustments whenever a SOLO is selected.

yGLOBAL MODE (STE)

The GLOBAL MODE STE switch (not present on Output modules 1-4 of a 24- bus FIVE Monitor which are mono only) provides switching of the associated pairs of send controls on the input channels between MONO and STEREO operation. In STEREO mode, the SOLO switches on the two Outputs are linked in software, so that pressing one automatically activates the other. See SOLO below for infor- mation on how this switch affects the sends to the SOLO busses.

u& i SOLO / ALT

The SOLO switch feeds the pre and post-fade Group signal to one of two sets of PFL and stereo AFL busses: Main or Alternate, depending on the setting of the mechanically latching ALT switch i. The PFL / AFL state of the SOLO is affect- ed by the global PFL/AFL mode switch on the Master module. The PFL feed is post-INSERT.

The function of the Output SOLO switch is also affected by the GLOBAL MODE (STE) switch. If the mode is mono, each Output SOLO button switches an equal feed at unity gain to each of the AFL left and right busses, and a PFL signal to the PFL bus. If the mode is stereo, the odd and even SOLO switches are logic linked as a pair and the feed is changed to odd Group AFL to left AFL bus, even to right, at unity gain. The PFL feed remains mono.

The SOLO swithces can also remotely control a BSS Varicurve™ system - see page 4.20 for details.

METERING

The FIVE Monitor is fitted with two banks of VU Meters for all Group outputs, with switching of the lower bank to display Matrix outputs if required. Two large VUs read the Left and Right outputs.

FIVE Monitor Functional Description

4.12

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Five Monitor Contents Five Monitor Contents Contents Five Monitor Contents Introduction Five Monitor IntroductionSystem Overview Power SupplyIntroduction Warranty Five Monitor Introduction Installation Five Monitor InstallationAll dimensions are in millimeters inches in brackets DimenionsPower Supplies & cables Precautions and Safety InstructionsGeneral Precautions Signal LevelsInitial Wiring Considerations Mains InstallationGeneral Wiring Procedures Audio WiringShielding Points to RememberAudio Connectors ConnectionsJumper Options Five Monitor Installation Block Diagrams Five Monitor Block DiagramsBus Mono Input Module Flash IP Solo CLR IP Solo DET Mute Group Bus Stereo Input Module Input Meters Phantom Sens On Input Fader PCB Insert LHS Multipin Upper Output Master Connector Bus Output ModuleMaster Module Insert Mode BUS Send Return Part Comms LINK/MIDI Rearcon EQ Output Functional Description Five Monitor Functional DescriptionInput Module Input A/B BHMF LMFYI Mute ASN Mute Group Assignment Rr MuteMute Safe UI VCA ASN VCA Group AssignmentDirect OUT Balanced Rearcon PanelInput a and B XLR Insert Send Balanced48V L and R Optional Stereo Input ModuleRNG Range L/R MNO Mono L and RHMF Solo Input L and R XLR Output Module Solo Matrix MasterMute ALT SoloMetering Insert Send & Return balanced Rearcon PanelsAll Output XLRs balanced Master Module PFL / AFL Section Output Section MuteExternal PFL/AFL Wedge Output Main Wedge onVCA Master Faders Five Monitor Console Logic in / Logic OUT Five Monitor Functional Description Specifications Five Monitor SpecificationsTypical Specifications

Five Monitor Series specifications

The SoundCraft Five Monitor Series represents a significant advancement in professional audio mixing technology, tailored specifically for live sound environments. Renowned for their high-quality performance and user-friendly interface, these mixing consoles are designed for sound engineers and musicians who demand reliability and flexibility.

One of the standout features of the SoundCraft Five is its ergonomic design, which prioritizes ease of use. The console layout is intuitive, allowing for quick adjustments during live performances. With strategically placed faders, knobs, and buttons, engineers can make real-time changes without losing focus on the performance, an essential characteristic for any live set.

Equipped with advanced digital signal processing (DSP), the SoundCraft Five provides unparalleled sound clarity and precision. The built-in EQ features, including parametric equalizers, allow sound engineers to tailor the audio output to the specific acoustics of the venue. This adaptability ensures that performers are always heard at their best, regardless of the environment.

Another key technology in the Five Monitor Series is the compatibility with various audio formats and protocols. Utilizing both analog and digital inputs, these consoles can seamlessly integrate into complex audio setups. This flexibility is crucial for modern performances where multiple audio sources need to be managed efficiently.

The SoundCraft Five also incorporates high-quality preamps that deliver exceptional sound quality. These preamps ensure that every detail of the audio is captured without distortion, providing a warm and professional sound that enhances the overall listening experience.

Durability is a hallmark of the SoundCraft design philosophy. The Five Monitor Series is built to withstand the rigors of touring and live events, featuring rugged construction and reliable components. This resilience ensures that the mixer will perform consistently through various demanding situations.

Furthermore, the intuitive layout includes comprehensive metering options, allowing sound engineers to monitor levels effectively. This visual feedback is vital for maintaining optimal sound quality throughout the performance, helping to avoid potential issues before they arise.

In summary, the SoundCraft Five Monitor Series stands out in the competitive landscape of live sound mixing consoles. With its combination of user-friendly design, advanced DSP technology, high-quality preamps, and robust construction, it meets the diverse needs of modern audio professionals, making it an essential tool for any live performance setup.
Top Page Image Contents