VIZIO VX32L HDTV20A User Manual
b. If you have an HD service you must use the HDMI (best) or Component connection.
Note: Composite (AV1 and AV2) and
c. Turn on your Cable Box, VCR, External TV Tuner or Satellite Receiver and you will see a picture on your TV set. If there is not picture, make sure you have selected the correct input on the TV set.
d. If the selected input is RF, you should be aware that the TV set needs to be on either channel 3 or channel 4 matching the channel which has been selected on the back of the VCR, Cable Box, External TV Tuner or Satellite Receiver; please refer to Owner or User’s Manual of such equipment for details.
Note: The TV set will be displaying any television station or program selected by the Cable Box, VCR, External Tuner or Satellite Receiver. The TV set will not be able to change programs or channels; this is controlled by the equipment sending the signal. If the service being used is the one which setup includes a box with two different outputs for two different (distant) rooms, then scanning channels would help you to find the signal. Be aware that the channel to be selected varies from provider to provider; meaning that, you may have to call your provider company so they could provide you the specific channel when using high definition made TV sets. Some examples of these channels are: 105, 106, 115 and 116.
6.Fine Tuning your TV set for Home Use.
After completing Procedure 4 or Procedure 5; please follow the steps below to optimize your TV set display:
a.Press the Menu key to bring up the
Menu display. Use the 
or 
button to scroll to the Color Temperature option.
b. Press the 
button to select it.
c. Press either 
or 
button to change setting to Normal, and then press the LAST key again to go back to previous screen.
Version 5/20/2008 | 31 |
| www.VIZIO.com |