Vizio E470A0, E470-A0 manual

Page 4



Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.

Unplug the power cord before cleaning your TV.

When moving your TV from an area of low temperature to an area of high temperature, condensation may form in the housing. Wait before turning on your TV to avoid causing fire, electric shock, or component damage.

A distance of at least three feet should be maintained between your TV and any heat source, such as a radiator, heater, oven, amplifier etc. Do not install your TV close to smoke. Operating your TV close to smoke or moisture may cause fire or electric shock.

Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your TV and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your TV in a bookcase or cabinet unless proper ventilation is provided.

Never push any object into the slots and openings on your TV cabinet. Do not place any objects on the top of your TV. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your TV.

Your TV should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

Do not apply pressure or throw objects at your TV. This may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations.

The power cord must be replaced when using different voltage than the voltage specified. For more information, contact your dealer.

When connected to a power outlet, power is always flowing into your TV. To totally disconnect power, unplug the power cord.

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-isolated, dangerous voltage within the inside of your TV that may be of sufficient magnitude to constitute a risk of electric shock to persons.

Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

The wall socket should be installed near your TV and easily accessible.

Only power of the marked voltage can be used for your TV. Any other voltage than the specified voltage may cause fire or electric shock.

Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.

Unplug your TV during a lightning storm or when it will not be used for long period of time. This will protect your TV from damage due to power surges.

Do not attempt to repair or service your TV yourself. Opening or removing the back cover may expose you to high voltages, electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to qualified service personnel.

WARNING: Keep your TV away from moisture. Do not expose your TV to rain or moisture. If water penetrates into your TV, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.

Do not use your TV if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power

Image 4
Contents User Guide LLC When Reading this Manual Important Safety InstructionsWelcome Thank You for Choosing VizioPage Page Television Antenna Connection Protection Table of Contents Connecting a USB Thumb Drive to the TV Playing USB Media Inspecting the Package Contents Installing the TVInstalling the TV Step E470-A0 Controls and Connections Rear PanelFront Panel Remote Control WideReplacing Batteries Connecting Your Devices Connecting a DeviceConnecting an audio device Completing the First-Time Setup Using the On-Screen Menu Navigating the On-Screen MenuChanging the Input Source Changing the Screen Aspect RatioSetting Up Closed Captioning Activating the Sleep Timer Adjusting the Picture SettingsPage Page Adjusting the Audio Settings Advanced Audio See Adjusting the Advanced Audio Settings on Changing the TV Settings Page Page Page Page Page Page Using the Help Menu Page Page Using the Info Window Using USB Photo Slideshow Using USB photo slideshowPhoto Viewer Troubleshooting & Technical Support LET US HelpPage See Changing the Screen Aspect Ratio on Specifications Limited Warranty On Parts and LaborLegal & Compliance Models