VIZIO M260VP User Manual
Chapter 9 Maintenance and Troubleshooting
Cleaning the TV and Remote Control
1.Remove the power adapter cable from the TV.
2.Use a soft cloth moistened with diluted neutral cleaner to clean the TV and remote control. VlZlO recommends using an HDTV cleaning solution which can be purchased at any major retailer.
3.Wring liquid out of the cloth before cleaning to prevent water from penetrating into the housing.
4.Wipe the TV and remote control with a dry cloth after cleaning.
•Do not use volatile solvent (such as toluene, rosin and alcohol). Such chemicals may damage the housing, screen glass, and remote control, and cause labeling to peel.
•The screen glass is very fragile. Do not scrape it with any sharp object.
•Do not press or tap the screen to avoid cracking.
Troubleshooting Guide
If the TV fails or the performance changes dramatically, check the following troubleshooting guide for possible solutions. Remember to check the peripherals to pinpoint the source of the failure. If the display still fails to perform as expected, contact the VlZIO for assistance by calling
Receive the error message | • | Press | the INPUT | button | on the remote control | to select | a different | input | source. | ||||||
"No Signal." | • | If you | are | using | cable | connected directly | to | the | TV | or an | antenna, | scan for | |||
| |||||||||||||||
|
| channels from the Tuner menu in the OSD. |
|
|
|
|
|
| |||||||
| • | Press | the | TV button | on the top of the | remote | to | return to | the | TV | mode. | ||||
No power. | • | Make | sure | the power | button is ON (VIZlO | logo glows | white). |
|
|
| |||||
•Make sure the AC power cord is securely connected to the AC socket.
•Plug another electrical device to the power outlet to verify that the outlet is working.
No sound. | • | Press Volume + (Up) on the remote | control. |
|
|
|
|
| |||||
| • | Press | MUTE | on the remote | control | to make sure that | MUTE is not ON. |
| |||||
| • | Check | your | audio settings. The audio may be set | to SAP, or the speakers | are set | |||||||
|
| to off. |
|
|
|
|
|
|
|
|
|
|
|
| • | Check | the audio | connections | of external devices | that | may be connected | to the | |||||
|
| HDTV. |
|
|
|
|
|
|
|
|
|
| |
| • | If you are using | an antenna, | the signal strength | of the | channel may be low. Make | |||||||
|
| sure your antenna is connected securely to the TV and move the antenna around | |||||||||||
|
| the room or close to a window. |
|
|
|
|
|
| |||||
If the screen is black. | • | Make | sure the power | button | is ON (VIZlO Logo glows | white). |
|
| |||||
| • | Press | the INPUT button on the remote control to select a different | input source. | |||||||||
| • | Check the connections | of external devices that | may be connected | to the HDTV. | ||||||||
| • | Press | the TV button on the top of the remote to | return to the TV mode. |
| ||||||||
Version 4/16/2010 | 43 |
www.VlZlO.com