VIZIOM260VPUserManual
The display image does not cover the entire screen.
You can see a picture but you cannot hear sound.
•If you are in RGB mode (Computer), make sure that
•If you are using TV, AVl, or AV2 with 480i input, press the WIDE button on the remote control to scroll through various screen modes.
•Press Volume + (Up) on the remote control.
•Press MUTE on the remote control to make sure that MUTE is not ON.
•Check your audio settings. The audio may be set to SAP, or the speakers are set to off.
•Check the audio connections of external devices that may be connected to the HDTV.
The TV has pixels (dots) that are always dark or colored.
You see "noise" or "trash" on the screen.
You switch to a different input and the volume changes,
You switch to a different input and the screen size changes.
Tips for
Tips for Letterbox Content Users.
USB device is not recognized.
Image or sound is interrupted or distorted.
Slideshow doesn't start.
Your HDTV is manufactured using an extremely high level of precision technology, however, sometimes some pixels of your HDTV may not display. Pixel defects within industry specifications are inherent to this type of product and do not constitute a defective product.
When your HDTV's digital capabilities exceed a digital broadcast signal, the signal
is
If you are using an antenna, the signal strength of the channel may be low. Make sure your antenna is connected securely to the TV and move the antenna around the room or close to a window.
•The TV remembers the volume level from the last time you adjusted it. If the sound level is higher or lower from another source, then the volume wilt change.
•The TV remembers the viewing mode from the last time you used a particular input (AV, HDMI and TV).
•Your HDTV is an ideal platform for viewing High Definition Content.
•Best image quality wilt be achieved by HDMI.
•Due to variances in broadcast practices, it is possible some image distortions can
OCCUr.
Some Letterboxed (or "Widescreen") versions of DVD movies are formatted for standard 4:3 Televisions. Your HDTV has the ability to expand this content so the entire screen is filled at the expense of image accuracy. To use this function, press ZOOM on the remote control to cycle among the options.
•Make sure the device is correctly inserted.
•Make sure the device is FAT or FAT32
•Make sure it contains the supported files.
•Make sure the device is correctly inserted.
•Make sure that the file complies with the supported format, bit rate and/or profile. Also check the file for damage.
•Some files that comply with the supported format may not play back or display properly.
•Make sure the viewer isn'tin pause, rotation, or zoom mode.
Version 4/16/2010 | 45 |
www.VlZIO.com