VIZIO VO42L FHDTV10A User Manual
Chapter 3 Setting Up to Watch Television
For ‘Preparing Your LCD HDTV for Wall Mounting’, see page 6.
3.1Basic LCD HDTV Start Up
1.Connecting the Power Cable
Connect the power cord to the power cord connector on the back of the HDTV, and then plug the power cord into an AC wall socket.
2.Connect Audio and Video Cables to the HDTV (see pages 15 ~ 28 for detailed steps)
3.Turning Power On
Once all the components are connected, press the Power ON button on the side of the HDTV, or press the Power ON (Orange) button on the remote control.
4.Initial Setup
After powering on the TV set, the Initial
Setup screen will come up; please press
the 
button on the remote control.
The Language choice screen will be displayed; the default English option is highlighted. If you wish to change the OSD language to Español or Français, press the button on the remote control to select the language you want.
Press the 
button on the remote to go to the next screen.
Note: At this point, if a
a.The Tuner screen will be displayed; default choice is
Antenna. If you are using Cable (No Box) Service, press the 
button on the remote control to highlight CABLE.
Press the 
button on the remote to go to the next screen.
Version 2/27/2008 | 30 |
| www.VIZIO.com |