VIZIO VO37L HDTV10A User Manual
Preparing Your LCD HDTV for Wall Mounting
To remove the stand base
1.Unplug all of the cables and cords from your VO37L HDTV10A.
2.Place the VO37L HDTV10A face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage to the TV.
3.Push up the plastic panel on the back of the stand and lift it away once to release.
4.Remove the eight (8) screws that were hidden by the panel, while holding the base.
5.Carefully remove the stand base.
Now, the VO37L HDTV10A can fit securely to a mount (sold separately) by utilizing the mounting holes in the center of the back panel of the TV. Please make sure to read the instructions of your specific mount to properly hang the VO37L HDTV10A.
The pitch of the mounting holes is 400mm horizontally and 200mm vertically.
The screw type required is metric M6, 1.00mm pitch. The length of the screws will depend on the thickness plate being attached to TV set, our brackets come with different length screws.
To find the perfect mount for the VIZIO VO37L HDTV10A, browse VIZIO’s certified mount selection at www.VIZIO.com or call directly
Version 2/28/2008 | 6 |
| www.VIZIO.com |