VIZIO VP50HDTV User Manual
WIDE/Record – This button cycles through the available screen formats. The options are Wide, Normal, Zoom, Panoramic. Note: in RGB/PC mode the options are 4:3 and 16:9.
This button also functions as VCR Record when the component is activated with the remote control.
SLEEP/Pause – This button allows the user to select the sleep options by adjusting the timer in 30 minute increments up to 120 minutes. Additionally, this button pauses the CD, DVD or VCR when the component is activated with the remote control.
MTS/Play – This button will select the MTS options of Stereo, SAP or Mono in TV mode and alternate audio channels, where available, in DTV mode. Additionally, this button plays the CD, DVD or VCR when the component is activated with the remote control.
CC/Stop – Use this button will set the Closed Caption mode when viewing a DTV or TV channel. Note: To set the default Closed Caption setting for all channels see Section 3.4, DTV Tuner Setup. For DTV the options are CC1, CC2, CC3, CC4, Service1 or Service2. For TV and AV, the options are On or Off. Additionally, this button stops the CD, DVD or VCR when the component is activated with the remote control.
TV/Previous Chapter – Repeated pressing of this button switches between DTV and TV programming. Note: This button has been
AV/Reverse – Repeated pressing of this button with switch between AV1 and AV2 inputs. Additionally, this button rewinds the CD, DVD or VCR when the component is activated with the remote control.
COMPONENT/Forward – Repeated pressing of this button with switch between Component 1 and Component 2 inputs. Additionally, this button forwards the CD, DVD or VCR when the component is activated with the remote control.
HDMI/ Next Chapter – This button will select the HDMI input. Additionally, this button functions as a DVD Next Chapter when the component is activated with the remote control.
ZOOM (- and +) – Use these buttons to increase or decrease the size of the picture. Note that in the zoom mode parts of the picture will not be visible because they extend beyond the edges of the screen.
FREEZE – Press this button to
RGB – This button selects a connected RGB Analog component such as a PC. PIP – Use this button to activate the
PIP CH (- and +) – These buttons are used to select the channels within the PIP screen when DTV/TV is the PIP input selected.
AUDIO – Press this button to switch the audio from the main screen to the
PIP Input – Press the button to choose the PIP input. Note: The TV must be in PIP/POP mode for this button to be functional. For additional information regarding the PIP/POP options, see 3.5.12 – Picture-
PIP Size – Press this button to select the size of the PIP screen from one of the following: small, medium or large.
MODE – Use this button to change the picture mode from Custom, Standard, Movie and Game. SWAP – Used to swap the inputs from the main screen and the
Version 4/17/2007 | 12 |
| www.VIZIOCE.com |