VIZIO VOJ320M User Manual
TV Menu
When you first turned on your HDTV you set up your TV for DTV / TV channels using the Initial Setup screens. If you did not do this or if your setup has changed, you can do this from the TV menu.
1.Press the 
button on the remote control or the side of the TV and the Picture menu will be shown on the screen.
2.Press either ▲ or ▼ on the remote control or CH ▲ or CH ▼ on the side of the HDTV to highlight the TV menu option.
3.Press the 
button to select the options in the TV menu.
4.Press either▲ or ▼ on the remote control or CH ▲ or CH ▼ on the side of the HDTV to select a TV menu option.
5.Once the menu option is highlighted, press either ◄ or ► on the remote control or VOL + or VOL – on the side of the HDTV to adjust the setting.
6.Press the LAST key once to return to the previous screen or repeatedly to return to your program if the task has been completed.
TV menu options:
Tuner Mode
Select Cable or Air (Antenna) depending upon which equipment you have attached to the DTV / TV Input.
Auto Search
Automatically search for TV channels that are available in your area. The TV will search for analog and digital channels.
Partial Channel Search
If you believe channels are missed from the auto search, you can do a partial channel search to look for channel in a certain channel range again. Select to scan for Analog, Digital, or both Analog/Digital channels, then press the ▼ button to highlight the “To” and “From” selection. Press the ► button to select
the range of channel numbers you want to start searching in. Press 
to start channel search.
Skip Channel
After the TV has stored all of the available digital channels in memory you will find that some channels are too weak to watch comfortably or they may be channels you do not want to see. Press the ► button to select the channel to be skipped when using the CH▲ or CH▼ buttons. You will still be able to select this channel using the number buttons on the remote control.
MTS
This feature allows you to select the different languages the broadcaster is transmitting the audio with the program you are watching. This signal is usually Spanish.
Version 6/5/2009 | 39 |
| www.VIZIO.com |