Vizio P42 manual Introduction Before Use, Specifications

Chapter 1 - Introduction

1.1 - Before Use

Congratulations on your VIZIO P42 42” Plasma Television purchase. Thank you for your support of V, Inc. and its Plasma Television product line. The P42 is a precise electronic product and you should read the following instructions carefully to maximize the performance of the product. It has passed the Class-B EMC test and the UL and CSA safety certifications and you can be assured of the highest quality display with the utmost reliability. After you have finished reading the instructions, put them away in a safe place for future reference.

Note: In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. However the method of connecting and operating the unit is the same.

1.2 - Specifications

	P42 ED		P42 HD
Panel	42", 16:9 Aspect Ratio
Resolution	852 x 480		1024 x 768
Pixel (Dot) Pitch	1.08 mm x 1.08 mm (H x V)		0.90 mm x 0.676 mm (H x V)
Display Compatibility	EDTV (480p)		HDTV (720p)
Signal Compatibility	480i (SDTV), 480p (EDTV), 720p (HDTV), 1080i (HDTV)
Brightness	1000 cd/m2		1000 cd/m2
Contrast	2000:1 typical		3000:1 typical
Viewing Angle	>160 degrees (horizontal and vertical)
	2 x Composite Video (2 x RCA), 2 x S-Video (1 x 4-pin DIN), 1 x
	Component (3 x RCA, YCbCr Video) & 1 x Component (3 x RCA,
	YPbPr Video), 1 x Digital Video (1 x DVI), 1 x Analog RGB (1 x 15-pin
Inputs	D-Sub), 4 x Audio (2 x RCA, Left + Right), 1 x RF (1 x F Connector for
	internal NTSC Tuner), 1 x Audio (1 x Stereo Mini Jack)
Output	1 x Stereo Audio (1 x RCA, L & R), 1 x subwoofer (1 x RCA)
	PiP, POP, CC, V-Chip, 3D Comb Filter, 3:2 Pull Down, Gamma
	Correction, Scalar and De-interlacer, NTSC Video decoding via RF
	(Antenna, Cable or Satellite [Set top box may be required]) or Video
	(CVBS, S-Video or Component YCbCr), Progressive Scan Video via
	Component YPbPr, VGA or DVI, HDTV via Component YPbPr, VGA or
	DVI (Set top box may be required), Computer 640x480, 800x600,
Features	1024x768 via VGA or DVI, SRS and BBE Sound enhancement.
Interface	1 x RS232 (9-pin D-sub)
Speakers		2 x 15W
Power
Input	IEC Connector for direct power line connection
Voltage Range	100 - 240 Vac at 50/60 Hz.
Power Consumption	360 W average		440 W average
	40.9" x 25.45" x 5.2" w/o stand or		speakers; 48.65" x 27.2" x 10.6"
Dimensions	w/stand and speakers
Net Weight	85 lbs w/stand and speakers
Gross Weight	115.8 lbs w/stand and speakers
Certifications	UL, C-UL, FCC Class B
Version - 7/21/2004	2