Vizio M801D-A3, M801DA3, M701D-A3R, M601D-A3R Highlight Manual Setup Press OK. The Manual Setup

Changing the Manual Setup Settings

Advanced users can fine-tune the network settings using the Manual Setup feature.

5

Connecting to a Hidden Network

To connect to a wireless network whose network name (SSID) is not being broadcast:

To change advanced network settings:

1. From the NETWORK menu,
	VIZIO
highlight Manual Setup and
press OK. The MANUAL SETUP		MANUAL SETUP
menu is displayed.	DHCP					Off
2. Use the Arrow and OK buttons	IP Address		0	.0	.0	.0
	Subnet Mask		0	.0	.0	.0
to adjust each setting:
	Default Gateway		0	.0	.0	.0
• DHCP - (Dynamic Host
	Pref. DNS Server		0	.0	.0	.0
Configuration Protocol) This	Alt. DNS Server		0	.0	.0	.0
setting must be turned Off	RJ45 MAC		xx:xx:xx:xx:xx:xx
to change any of the other	Wireless MAC		xx:xx:xx:xx:xx:xx
settings.
• IP Address - The IP address
assigned to the TV.
• Subnet Mask - The subnet
mask.
• Default Gateway - Your
network’s default gateway
address.
• Pref. DNS Server - Your
preferred domain name
server address.

•Alt. DNS Server - Your alternate domain name server address.

3.If you need the RJ45 (Ethernet) MAC address or the Wireless MAC address to set up your network, these are displayed at the bottom of the Manual Setup menu.

4.Press the EXIT button on the remote.

1.Press the MENU button on the remote. The on-screen menu is displayed.

2.Use the Arrow buttons on the remote to highlight Network and press OK. The NETWORK menu is displayed.

3.Highlight Hidden Network and press OK.

4.Using the on-screen keyboard, enter your network’s name (SSID), then highlight Connect and press OK.

5.Using the on-screen keyboard, enter your network’s password, then highlight Connect and press OK.

6.Press the EXIT button on the remote.

VIZIO

ENTER ACCESS POINT NAME

Enter your access point name.This is used to connect to an access point with a hidden SSID.

a	b	c	d	e	f	g	h	i
j	k	l	m	n	o	p	q	r
s	t	u	v	w	x	y	z	0
1	2	3	4	5	6	7	8	9
.@#					Space

Connect

28