The image quality is not good.
•For the best image quality, view
•If you are using an antenna, the signal strength of the channel may be low. Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal.
The picture is distorted.
•Move the TV away from electrical appliances, cars, and fluorescent lights.
•Ensure all cables are securely attached.
The display image does not cover the entire screen.
•If you are using TV, AV, or Component with 480i input,
press the 
button on the remote to change the screen mode.
The TV has pixels (dots) that are always dark or always lit.
•Your HDTV is
A
I see “noise” or static on the screen.
•When your TV’s digital capabilities exceed a digital broadcast signal, the signal is
•If you are using an antenna, the signal strength of the channel may be low. Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal.
When I change input source, the volume changes.
•The TV remembers the volume level on each input source. If the volume level on the new input source is higher or lower than the level on the source you switch from, the difference may be noticeable.
•Use the Volume Up/Down buttons on the remote to adjust the volume.
When I change input source, the display image changes size.
•The TV remembers the viewing mode on each input source. If the viewing mode on the new input source differs from the one on the input source you switch from, the difference may be noticeable.
•See Changing the Screen Aspect Ratio on page 21.
60