Vizio E190VA, E260VA, E261VA Adjusting the Audio Settings, Enabling or Disabling SRS TruSurroundHD

E190VA / E220VA / E260VA / E261VA

To adjust the screen aspect ratio:

1.Press the MENU/OK button on the remote. The on-screen menu is displayed.

2.Use the Arrow buttons on the remote to highlight the Wide icon and press OK. The Wide menu is displayed.

3.Use the Left/Right Arrow buttons on the remote to highlight the screen mode you want to display, then press MENU/OK:

•Normal preserves the content’s original aspect ratio. Since the 4:3 aspect ratio is not large enough to fill the TV’s screen, black bars are added to the left and right of the display image.

•Wide stretches a 4:3 aspect ratio picture to the edges of the screen. Since the picture is being stretched, the display image may appear distorted. If the program is already formatted for widescreen viewing (1.85:1 or 2.35:1), then black bars will appear on the top and bottom of the display image.

•Zoom expands images with black bars to fit the screen.

•Panoramic expands the display image to fill the screen. Images may appear wider than intended. If you are watching widescreen (1.85:1 or 2.35:1) content, black bars will still appear on the top and bottom of the display image. This option is only available when the TV is displaying a 480i/480p source.

•Stretch expands the display image to fill the screen. Images may appear wider than intended. If you are watching widescreen (1.85:1 or 2.35:1) content, black bars will still appear on the top and bottom of the display image. This option is only available when the TV is displaying a 720p/1080i/1080p source.

6

Adjusting the Audio Settings

Using the Audio Settings menu, you can adjust the following:

•Enable or disable SRS TruSurroundHD™

•Enable or disable SRS TruVolume™

•Adjust the equalizer settings

•Adjust bass and treble levels

•Adjust speaker balance

•Enable or disable the built-in speakers

•Select the digital audio output mode

•Change the audio language

•Reset the audio settings

Enabling or Disabling SRS TruSurroundHD

TruSurround HD is a robust multichannel virtualization technology developed by SRS Labs that provides an enhanced listening experience unlike any other technology offered for a two speaker playback environment.

To enable or disable SRS TruSurroundHD:

1.Press the MENU/OK button on the remote. The on-screen menu is displayed.

2.Use the Arrow buttons to highlight Audio and press MENU/OK.

3.Use the Arrow buttons to highlight SRS TruSurround HD.

4.Press the Right/Left Arrow buttons to select On or Off and press EXIT.