VIZIO320VLandE370VLUserManual
Analog Audio Out
ThisoptionsetsthevolumecontrolpropertieswhenusingtheRCA(whiteandred) connectorsasaudiolineouttoconnecta Receiver/Amplifier/HomeTheatersystemChoose. fromFixedorVariableWhensettoVariable,volumefromtheexternalspeakerswillchange. accordingtothevolumesettingontheTV.Ifitissetto Fixed,thevolumecanonlybe changedbythesettingsontheexternalstereosystem.
Equalizer Settings
To select the options in the Equalizer
Starting from lowest to the highest, they are 100 Hz, 300Hz, 1 kHz, 3 kHz and 10 kHz.
1.Press _1or • to select the frequency to be adjusted.
2.Use • or • to adjust the selected frequency to your preference. Values above 0 will boost the frequency and values below 0 will attenuate the frequency.
Note: The Equalizer adjustment will only be available when SRS TSHD is set to Off.
Reset Audio Mode
Return all Audio settings to factory default. A screen will come up to confirm your selection or to cancel it. Press _1or • to make the selection, and then press OK to accept it.
Note: Only settings under the Audio menu will be reset.
Settings Menu
Tuner
Note: The tuner option can only be selected when your HDTV is in TV input mode.
Tuner Mode
Select Cable or Antenna depending upon which you have attached to the DTV / TV Input.
Auto Channel Search
Automatically search for TV channels that are available in your area. Be sure to first select the correct tuner mode above. The TV
will search for analog and digital channels. When the search is done, press OK to begin watching your programs.
Partial Channel Search
If you believe channels are missed from the auto search, you can do a partial channel search to look for channel in a certain channel range again. Select to scan for Analog, Digital, or both Analog/Digital channels, then press the • button to highlight the "From" and "To" selection. Press the • button to select the range
of channel numbers you want to start searching in. Press OK to start channel search.
36
www.VlZIO.com