Vizio E221-A1 user manual Highlight To Channel and enter the channel where you want

5

Selecting a Tuner Input

Select the type of tuner input you will be using.You can select either Antenna (Over-the-air) or Cable (Out-of-the-wall) connections.

1.From the Tuner menu, highlight Tuner Mode and press OK. The Tuner Mode menu displays.

2.Highlight Antenna or Cable and press OK. Press EXIT.

Scanning for Channels

Before the TV can detect and display channels and their associated information, you must scan for channels. A channel scan may also be necessary when the TV has been moved to an area where different free-to-air broadcast television channels are available.

To perform an Auto Channel Scan:

Adding New Channels

Occasionally, you may need to add a new range of channels or add a new analog channel. You can do this by using the Partial Channel Search and Add Analog Channel options.

To add a range of new channels:

1.	From the Tuner menu, highlight Partial Channel Search,
	and press OK. The Partial Channel Search menu is
	displayed.
2.	Highlight Scan Mode and select the type of channel you
	are adding: Analog, Digital, or Analog/Digital.
3.	Highlight From Channel and enter the channel where
	you want to begin the scan. (Use the Left Arrow button to
	backspace. Use the Number Pad on the remote to enter the
	channel.)

1.From the Tuner menu, highlight Auto Channel Scan, and press OK. The channel scan begins.

2.Wait until the channel scan is 100% complete. Highlight Done and press OK.

3.Press the EXIT button on the remote.

If the channel scan is cancelled,the channels that were already discovered are retained. A new channel scan will clear all channels.

VIZIO

CHANNEL SCAN

Channel Scan

Digital Channels: 0

Analog Channels: 0

13% Complete

Cancel

Cancel the channel scan.

28

4.	Highlight To Channel and enter the channel where you want
	to end the scan. (Use the Left Arrow button to backspace.
	Use the Number Pad on the remote to enter the channel.)
5.	Highlight Start and press OK. The partial channel search
	begins.
6.	Wait until the partial channel search is 100% complete.
	Highlight Done and press OK.
7.	Press the EXIT button on the remote.