Changing the Input Source

External devices such as DVD players, Blu-Ray Players, and video game consoles can be connected to your TV.To use one of these devices with your TV, you must first change the input source in the on-screen menu.

Changing the Screen Aspect Ratio

The TV can display images in four different modes: Wide, Zoom, Normal, and Stretch. Each mode displays the picture differently.

To change the screen aspect ratio:

To change the input device:

1.	Press the MENU button on the
	remote. The on-screen menu is
	displayed.
2.	Use the Arrow buttons on the

Input Source Selection

1.Press the MENU button on the remote.

2.Use the Arrow buttons to highlight the Wide icon. Press OK.

	Screen Mode
Wide	Zoom	Normal	Panoramic

remote to highlight the Settings

icon and press OK. The TV

Settings menu is displayed.

3. Use the Up/Down Arrow

buttons on the remote to

highlight the input source and

press OK. The Input Source

Selection menu is displayed.

4. Use the Up/Down Arrow

buttons on the remote to

highlight the input source you

wish to display and press OK.

Component

HDMI 1

RGB

Watch TV from your Antenna or Cable

out-of-the-wall.

3. Use the Arrow buttons to highlight your desired screen mode

and press OK:

• Normal preserves the content’s original aspect ratio.

Since the 4:3 aspect ratio is not large enough to fill the

TV’s screen, black bars are added to the left and right of

the display image.

• Wide stretches a 4:3 aspect ratio picture to the edges

of the screen. Since the picture is being stretched, the

display image may appear distorted. If the program

is already formatted for widescreen viewing (1.85:1 or

2.35:1), then black bars will appear on the top and

bottom of the display image.

• Zoom expands images with black bars to fit the screen.

EXIT

• Panoramic expands the display image to fill the screen.

Images may appear wider than intended. If you are

watching widescreen (1.85:1 or 2.35:1) content, black

bars will still appear on the top and bottom of the display

image. This option is only available when the TV is

displaying a 480i/480p source.