Changing the TV Settings

Using the settings menu, you can:

•Change the input source

•Set up the TV tuner

•Name the TV inputs

•Set up parental controls

•Change the on-screen menu language

•Set the time

•Adjust the CEC settings

Changing the Input Source

Settings
Input Source	TV
Tuner
Name Input
Parental Controls
Menu Language	English
Time & Local Settings
CEC Settings
Power LED	On
Select input source

Setting the Tuner Mode

If you are using a device that is connected to the RF input, such as an external antenna or cable TV connection, you must set the tuner mode.

1.Press the MENU button on the remote. The on-screen menu is displayed.

2.Use the Arrow buttons on the remote to highlight the Settings icon and press OK. The Settings menu is displayed.

3.Highlight Tuner and press OK. The Tuner Mode menu is displayed.

4.Highlight Antenna or Cable and press OK.

5.Press the EXIT button on the remote.

Scanning for Channels

Before the TV can detect and display channels and their associated information, you must scan for channels. A channel scan may also be necessary when the TV has been moved to an

To quickly access the Input Source menu, press the INPUT button on the remote.

area where different free-to-air broadcast television channels are available.

To change the input source from the Settings menu:

1.Press the MENU button on the remote. The on-screen menu is displayed.

2.Use the Arrow buttons on the remote to highlight the Settings icon and press OK. The Settings menu is displayed.

3.Highlight Input Source and press OK. The Input Source menu is displayed.

4.Highlight the input source you want to display and press OK.

1.From the Tuner Settings menu, highlight Auto Channel Scan. The auto channel scan begins.

2.Wait until the channel scan is 100% complete. Highlight Done and press OK.

3.Press the EXIT button on the remote.

Channel Scan

Digital Channels: 16

Analog Channels: 5

50% Complete

Cancel