Vizio D390-B0 user manual ADD Analog Channel

To add a single new analog channel:

1.	From the Tuner menu, highlight
	Add Analog Channel and
	press OK. The ADD ANALOG
	CHANNEL menu is displayed.
2.	Highlight Enter Channel # and
	use the Number Pad on the
	remote to enter the number of
	the channel you are adding.
3.	Highlight Add Channel and
	press OK. The TV scans for the
	channel.

VIZIO

ADD ANALOG CHANNEL

Enter Channel #

Add Channel

5

Skipping Channels

After a channel scan is completed, you may find that some channels are too weak to watch comfortably. There may also be some channels you do not want to view. You can remove these channels from the TV’s memory with the Skip Channel feature.

Channels that have been removed with the Skip Channel feature can still be viewed if the channel is entered using the Number Pad. If you wish to completely block a channel from being viewed, use the parental controls. See Locking and Unlocking Channels on page 38.

4. When the TV is done scanning

for the channel, press the EXIT

button on the remote.

To remove a channel:

1.From the Tuner menu, highlight Skip Channel, and press OK. The SKIP CHANNEL menu is displayed.

2.For each channel you wish to remove, use the Up/Down Arrow buttons on the remote to highlight the channel and press OK. A Ï appears to the right of each channel you select.

3.When you have selected all of the channels you wish to remove, press the EXIT button on the remote.

VIZIO

	SKIP CHANNEL
1	Test 0
1	Test 1	x
1-2	Test 2	x
2	Test 3
2-2	Test 4	x
2-3	Test 5

31