Chapter 3: First Time Setup
Overview
Once the hardware is installed, physically connected to your network, and powered on, you can configure the M3800 so that it is accessible to your network users. Follow the steps below for initial software setup.
Thecus Setup Wizard
The handy Thecus Setup Wizard makes configuring M3800 a snap. To configure the M3800 using the Setup Wizard, perform the following steps:
1.Insert the installation CD into your
2.The Setup Wizard should launch automatically. If not, please browse your
NOTE
For MAC OS X users, double click on Thecus Setup Wizard 1.1.99.dmg
3.The Setup Wizard will start and automatically detect all Thecus storage devices on your network. If none are found, please check your connection and refer to Chapter 8: Troubleshooting for assistance.
4.Select the M3800 that you like to configure. Press Next to continue.
14