System Logs
Item | Description |
Truncate All Log File | Clear all log files. |
<< < > >> | Use the forward ( > >> ) and backward ( << < ) buttons |
| to browse the log pages. |
INFO | Provides all log information including warning messages and |
| error messages. |
WARN | Shows all warning messages and error messages. |
ERROR | Shows only error messages. |
GO | Specify the number of lines per page and press Go. |
Ascending | Shows logs by date in ascending order. |
Descending | Shows logs by date in descending order. |
Download All Log File | Export all logs to an external file. |
Time and Date Settings
From the System menu, choose the Time item and the Time screen appears. Set the desired Date, Time, and Time Zone. You can also elect to synchronize the system time on the M3800 with an NTP (Network Time Protocol) Server. You can change any of these items and press Apply to confirm your settings.
See the following table for a detailed description of each item:
Time
Item | Description |
Date | Sets the system date. |
Time | Sets the system time. |
Time Zone | Sets the system time zone. |
NTP Server | Select Yes to allow the M3800 to synchronize with the NTP |
| server shown below. |
| Select Manually to allow the M3800 to synchronize with an NTP |
| server of your choice. |
| Select No to not have the M3800 to synchronize with an NTP |
| server. |
WARNING | If an NTP server is selected, please make sure your M3800’s network has been |
setup to access the NTP server. |
43