Toshiba SDK990KU, SD7200KU Connecting to a display Using a Hdmitm cable, Hdmi Cable, About Hdmi

* Only for TV equipped with component video input jacks which support the progressive scan.

Connections

Switching the output signal (interlaced / progressive) using the remote control

You can temporarily switch the output signal for better picture quality. Press PROGRESSIVE button repeatedly on the remote control to select Video Output to P-Scan mode during stop.

If your TV does not support the progressive scan format, the picture will appear scrambled or blank. To return to normal picture, press PROGRESSIVE button repeatedly to turn off progressive mode.

• Make the following setting.

On-screen display	Select:	Page
“Digital Output”	“PCM” or	32
	“Raw”
“Video Out”	Component
	*P-Scan	31
	(Progressive)

Notes

•Refer to the owner’s manual of the connected equipment as well.

•When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

•If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD player away from the tuner and radio.

•The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, high volume sound may damage your hearing as well as the speakers.

•Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the speakers may be damaged.

•Analog audio out will not have sound if DTS playback is selected.

•ColorStream® and ColorStream Pro® are registered trademarks of Toshiba America Cousumer Products L.L.C.

Connecting to a display (Using a HDMITM cable)

Available output signals are below:

•Auto

•480p (progressive)

•720p (progressive)

•1080i (interlaced)

•1080p (progressive)

VIDEOY P P

VIDEO OUT

	AUDIO
HDMI OUT	OUT	R ANALOG L	COAXIAL DIGITAL

To HDMI

Output

HDMI Cable

HDMI-compatible display

Switching the video quality (HDMI mode) using HDMI button on the remote control or HDMI SELECT button on the front panel.

Press HDMI button on the remote control or HDMI SELECT button on the front panel to receive a suitable video quality in STOP mode. The video quality is required to match your TV having HDMI feature and suitable quality. Please also check your TV owner’s manual. Press this button to change the output signals as below. See the HDMI indicator and select the appropriate output signal.

• Make the following setting.

On-screen display	Select:	Page
“Digital Output”	“PCM”	32
“Video Out”	HDMI	31

HDMI indicator	Video output signal
illuminates “• 1080p ”	1080p (progressive)
Press
illuminates “• 1080i ”	1080i (interlaced)
Press
illuminates “• 720p ”	720p (progressive)
Press
illuminates “• 480p ”	480p (progressive)
Press
illuminates “• 480p, • 720p,	Auto
• 1080i, • 1080p”

Press

480p, 720p, 1080i and 1080p are signals created with this DVD Player from original 480i signal. The resolution of the picture may not be increased even if they are selected.

About HDMI

HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players, DTV, set-top boxes, and other AV devices. HDMI was developed to provide the technologies of High Bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one specification. HDCP is used to protect digital content transmitted and received by DVI-compliant or HDMI-compliant displays.

HDMI has the capability to support standard, enhanced, or high- definition video plus standard to multi-channel surround-sound audio. HDMI features included uncompressed digital video, a bandwidth of up to 2.2 gigabytes per second (with HDTV) signals, one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.

12