Advanced playback
Zooming a Picture
You can magnify areas within a picture.
Zooming a picture
Press ZOOM during normal, slow or still playback.
ZOOMThe centre part of the image will be zoomed in.
e.g. | 2 |
Each time you press the ZOOM button, the magnification level changes as follows:
1 | 2 | 3 | Off |
Press the ZOOM button to select the magnification level.
Press the 
/ 
/ / 
buttons to view a different part of the image.You may move the image from the centre position to UP, DOWN, LEFT and RIGHT direction.
When you reach the edge of the image, the display will not shift anymore in that direction.
To resume normal playback
Press ZOOM repeatedly until the 
Off is displayed. Original picture is restored.
ZOOM
Notes
•Some discs may not respond to zoom feature, for example, during VCD PBC On mode.
•During some scenes, the buttons may not work as described.
•Zooming does not work on subtitles or menus included on DVDs.
•The magnification level varies depending on the picture size you select.
Selecting the Sound Enhancement (E.A.M.*)
You can easily switch a preferred audio enhancement.
*E.A.M.: Enhanced Audio Mode
Selecting the sound enhancement
1 Press E.A.M.
E.A.M.
The sound enhancement will appear:
To exit the audio enhancement selection
Leave the DVD player unattended for about a few seconds after having made a selection.
3D effect
Press the E.A.M. button again, the sound enhancement change to Off.
3D*:
To obtain expansive virtual surround sound effects from two speakers.
To use this enhancement on sounds output from the ANALOG AUDIO OUT jacks, be sure to set “Digital Output” to “PCM”.
* Effective in playback of a DVD .
Notes
•Actual effects to sounds may vary depending on the speaker system. Make selection according to your preference.
•Actual effects to sounds may vary depending on the disc.
•When the DVD player is connected to an amplifier equipped with Dolby Surround Pro Logic, select “3D effect”. Otherwise, Dolby Surround Pro Logic may function differently than usual.
22